The version of Knoppix live CD I was using was 5.1.1. I have now tried ver 7.2 on DVD and it has no problem automounting & opening, browsing ntfs partitions/files on the desktop. At least under Knoppix, SATA0=sda, SATA1=sdb.
I have a two-disk RAID1 system that had some problems. I have disabled RAID, removed one of the drives, cleaned it up, and placed it back into the system. RAID is still disabled, but this drive boots fine.
My original intent is to use Clonezilla to clone from the cleaned up drive to the suspect drive. Problem is, I need to know how my SATA0,SATA1 slots are assigned to sda, sdb when booted under Clonezilla, otherwise I might copy the dirty drive to the clean drive. From what I have read, it isn't automatically going to assign SATA0=sda,SATA1=sdb.
If I could browse the windows root folder of each drive, I could easily tell which was which. I can boot with Knoppix, and it does show the drives, but I am unable to mount the ntfs partitions in order to take a look at the files (fat32 mounts ok). I tried from both the desktop, and the console using ntfs-3d. I found the same problem with gparted live.
It seems like I was able to do this before. What am I missing?
The version of Knoppix live CD I was using was 5.1.1. I have now tried ver 7.2 on DVD and it has no problem automounting & opening, browsing ntfs partitions/files on the desktop. At least under Knoppix, SATA0=sda, SATA1=sdb.
8 Ports Unmanaged Industrial Ethernet Switch Network Gigabit Ethernet Switch
$76.50
Cisco SG110 8 Port Gigabit Ethernet Switch SG110D-08-UK
$39.00
InHand Networks 5/8 Port Industrial Unmanaged Fast Ethernet/Giga DIN-Rail Switch
$76.50
5 Port Poe Gigabit Ethernet Smart Managed Plus Switch - Easy to Use
$85.22
HP 2530-48G 48 Port Gigabit Ethernet Network Switch J9775A
$30.95
New Linksys SE3005 5-port Gigabit Ethernet Switch
$18.99
New 10/100 Mbps 8 Ports Fast Ethernet LAN Desktop RJ45 Network Switch Hub
$11.49
Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch
$21.99
HP ProCurve 2530-24G J9776A 24 Port Gigabit Ethernet Managed Network Switch
$34.99
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95