The version of Knoppix live CD I was using was 5.1.1. I have now tried ver 7.2 on DVD and it has no problem automounting & opening, browsing ntfs partitions/files on the desktop. At least under Knoppix, SATA0=sda, SATA1=sdb.
I have a two-disk RAID1 system that had some problems. I have disabled RAID, removed one of the drives, cleaned it up, and placed it back into the system. RAID is still disabled, but this drive boots fine.
My original intent is to use Clonezilla to clone from the cleaned up drive to the suspect drive. Problem is, I need to know how my SATA0,SATA1 slots are assigned to sda, sdb when booted under Clonezilla, otherwise I might copy the dirty drive to the clean drive. From what I have read, it isn't automatically going to assign SATA0=sda,SATA1=sdb.
If I could browse the windows root folder of each drive, I could easily tell which was which. I can boot with Knoppix, and it does show the drives, but I am unable to mount the ntfs partitions in order to take a look at the files (fat32 mounts ok). I tried from both the desktop, and the console using ntfs-3d. I found the same problem with gparted live.
It seems like I was able to do this before. What am I missing?
The version of Knoppix live CD I was using was 5.1.1. I have now tried ver 7.2 on DVD and it has no problem automounting & opening, browsing ntfs partitions/files on the desktop. At least under Knoppix, SATA0=sda, SATA1=sdb.
IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8
$479.96
IBM 8247-22L S822L 2 CPUs 256GB 12x Drives SFF Power8 Linux Server
$749.00
Red Hat Enterprise Linux 5 Server - New and Sealed
$19.99
Asus ESC4000 G3 Barebones 0GB HDD Linux
$200.00
IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E
$799.96
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
Dell PowerEdge R730xd Server 2.60Ghz 32-Core 64GB 800GB SSD Debian Linux
$880.25
IBM Power 9 S922 8-Core 3.4-3.9Ghz 128Gb DDR4 2U Linux Server - 9009-22a
$3439.96
IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE
$199.87
POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives
$179.99