The version of Knoppix live CD I was using was 5.1.1. I have now tried ver 7.2 on DVD and it has no problem automounting & opening, browsing ntfs partitions/files on the desktop. At least under Knoppix, SATA0=sda, SATA1=sdb.
I have a two-disk RAID1 system that had some problems. I have disabled RAID, removed one of the drives, cleaned it up, and placed it back into the system. RAID is still disabled, but this drive boots fine.
My original intent is to use Clonezilla to clone from the cleaned up drive to the suspect drive. Problem is, I need to know how my SATA0,SATA1 slots are assigned to sda, sdb when booted under Clonezilla, otherwise I might copy the dirty drive to the clean drive. From what I have read, it isn't automatically going to assign SATA0=sda,SATA1=sdb.
If I could browse the windows root folder of each drive, I could easily tell which was which. I can boot with Knoppix, and it does show the drives, but I am unable to mount the ntfs partitions in order to take a look at the files (fat32 mounts ok). I tried from both the desktop, and the console using ntfs-3d. I found the same problem with gparted live.
It seems like I was able to do this before. What am I missing?
The version of Knoppix live CD I was using was 5.1.1. I have now tried ver 7.2 on DVD and it has no problem automounting & opening, browsing ntfs partitions/files on the desktop. At least under Knoppix, SATA0=sda, SATA1=sdb.
JUNIPER ELECTRONICS NFX250-ATT-LS1
$250.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$37.24
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
Juniper 48-Port PoE GbE Network Switch w/ 4-Port 10GB SFP+ Module EX4300-48P
$179.99
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch with RACK EARS, RESET
$46.99
Juniper EX4200-48PX 48-PORT 10/100/1000BASET PoE Ethernet Switch
$36.15
Juniper EX2300-48P 48-Port Gigabit Ethernet Switch PoE+ 4x SFP+ Power Cable
$104.40
Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch
$300.00
JUNIPER SRX340 SERVICE GATEWAY APPLIANCE Tested/Working #73
$111.99