Within Knoppix 7.2 avahi-daemon isn't enabled per default.
With "/etc/init.d/avahi-daemon status" you'll get the message:
Avahi mDNS/DNS-SD Daemon is not running
.
I note on syslog, using Knoppix 7.2 LiveUSB, there is always a time-out at boot,
waiting for avahi to do something.
Also, there's this note which seems tempting:
http://askubuntu.com/questions/40292...e-avahi-daemon
Is there any reason NOT to disable the avahi-daemon if one doesnt need
to access network services?
Within Knoppix 7.2 avahi-daemon isn't enabled per default.
With "/etc/init.d/avahi-daemon status" you'll get the message:
Avahi mDNS/DNS-SD Daemon is not running
Similar to my situation.(from the link in post #1)
dbus[991]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
This means that it failed to connect to the service since it's not running. The 30 seconds you spend waiting is not because the service is starting, is because another process expects the service to be running when dbus tries to access the key. If you want to really stop Avahi you should instead remove the package:
sudo apt-get remove avahi-daemon
There isn't a sane way to deactivate the daemon without messing with other networking services.
share
improve this answer
answered Jan 9 at 17:41
Braiam
22.7k124187
Perhaps here are more clues (typical syslog beginining at end of startup and getting on-line):
Jun 30 06:39:27 Microknoppix NetworkManager[2616]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 30 06:39:27 Microknoppix NetworkManager[2616]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 30 06:39:45 Microknoppix dbus[2492]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 30 06:58:34 Microknoppix -- MARK --
Jun 30 07:18:34 Microknoppix -- MARK --
Jun 30 07:29:28 Microknoppix NetworkManager[2616]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted
Jun 30 07:58:34 Microknoppix -- MARK --
Jun 30 08:18:34 Microknoppix -- MARK --
Jun 30 08:27:24 Microknoppix dbus[2492]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
Jun 30 08:27:24 Microknoppix dbus[2492]: [system] Successfully activated service 'org.freedesktop.UPower'
I've read the link you've posted; but the question there has been, how to deactivate avahi-daemon. In Knoppix the daemon isn't active.
But it isn't worth to wail over avahi. In my example of syslog you can see the last successfull action of dbus at 17:24:32. Many things happen in the intervall from 17:24:32 to 17:24:49. (There is no printer connected to Knoppix.)
At 17:25:03 I get the "failed" message from dbus. Therefore the "lost" time is about 14 seconds for me.
Code:Jun 30 17:23:59 Microknoppix syslogd 1.5.0#6.2: restart. <snip> Jun 30 17:24:32 Microknoppix dbus[2059]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Jun 30 17:24:32 Microknoppix dbus[2059]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jun 30 17:24:38 Microknoppix kernel: [ 49.241598] lp0: using parport0 (interrupt-driven). Jun 30 17:24:38 Microknoppix kernel: [ 49.241609] lp0: console ready Jun 30 17:24:38 Microknoppix kernel: [ 49.360701] ppdev: user-space parallel port driver Jun 30 17:24:38 Microknoppix udev-configure-printer: add /devices/pnp0/00:07/printer/lp0 Jun 30 17:24:38 Microknoppix udev-configure-printer: Failed to get parent Jun 30 17:24:38 Microknoppix udev-configure-printer: add /module/lp Jun 30 17:24:38 Microknoppix udev-configure-printer: Failed to get parent Jun 30 17:24:49 Microknoppix NetworkManager[2184]: <info> (wlan0): IP6 addrconf timed out or failed. Jun 30 17:24:49 Microknoppix NetworkManager[2184]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Jun 30 17:24:49 Microknoppix NetworkManager[2184]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started... Jun 30 17:24:49 Microknoppix NetworkManager[2184]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete. Jun 30 17:25:03 Microknoppix dbus[2059]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Greetings, Werner.
Thanks for your comments.
I have to admit my boot time now takes (only) 71 seconds,
but IIRC, when my LiveUSB was 'new' it only took 50 seconds.
71 seconds is only considerable when compared to my Win7
which still gets online in 50 seconds.
The reference suggests maybe 30 seconds are lost on an avahi timeout.
I'm not aware what I've done to add 21 seconds,
but it looks like perhaps I'm not handling avahi correctly.
Maybe it should be ON by default in my case.
This times are of no use. You have to messure the time from booting Windows7 or Knoppix up to the time you can really work with an OS: for example the end of start and stop of notepad within Windows or leafpad within Knoppix. And you have to differ,if you ar booting an OS from HD or USB-srick.71 seconds is only considerable when compared to my Win7
which still gets online in 50 seconds.
In your example I see a delay time of about 18 seconds.Code:Jun 30 06:39:27 Microknoppix NetworkManager[2616]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete. Jun 30 06:39:45 Microknoppix dbus[2492]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
In the meantime I did some measurings using my laptop, always from boot the OS to stop of the editor:
Knoppix 7.2 on USB stick 8GB => 44 sec.
Knoppix 7.3 on USB stick 8GB => 36 sec
Knoppix 7.2 HD install => 34 sec.
Windows 7 => 57 sec.
Knoppix 7.3 is optimized with its boottime In comparison with 7.2. And what I've seen: within 7.3 avahi-daemon is also not running, but dbus doesn't look and wait for avahi. But don't ask me, if we also can have this behaviour in 7.2.
Thanks again, Werner.
Perhaps 7.4 will improve things a little for me.
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2512.18
CSE-118 Supermicro 1U 3x GPU Server 2.1Ghz 16-C 128GB CX353A 2x1600W PSU Rails
$450.03
CSE-118 Supermicro 1U GPU Server 2.4Ghz 12-C 128GB 2x Nvidia K40 GPU 2x1600W PSU
$520.03
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 4x1G RJ-45 NIC 2x750W PSU
$399.04
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$275.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x Xeon E5-2620 @ 2.0GHz 64GB RAM NO HDDs
$108.96
Dell PowerEdge R820 Server 4x E5-4620 2.2GHz 32-Core Total 256GB 0HD 2x 1100w
$315.00
DELL PowerEdge R730 2x E5-2680v3 2.5GHz =24 Cores 64GB H730 4x 1.2TB SAS 4xRJ45
$382.00