Hello Bernhard!
Hardware ok by then? Size of RAM?
Did you test the RAM with the cheatcode "memtest" for some hours?
When I try to boot Knoppix 7.1 or 7.0.5 on an older Notebook (PIIIM, 1GHz) mounting KNOPPIX fails miserably with an error message that the file might be corrupt. Booting knoppix testcd does not reveal any errors and booting on a newer system (Pentium Dual Core E4500) is no Problem at all.
Does somebody have a clue, what might be the Problem and how to check it?
--
Bernhard
Hello Bernhard!
Hardware ok by then? Size of RAM?
Did you test the RAM with the cheatcode "memtest" for some hours?
Hi Werner,
> Hardware ok by then? Size of RAM?
most probably a hardware problem.
Booting old woody, mounting the cdrdom and trying md5sum /cdrom/KNOPPIX/KNOPPIX yields read error messages after about 20 minutes. I don't see any reason for that, but the cause might be due the 8-12x RW media, the drive or anything else ...
I don't know if I have the time to check every possible cause.
--
Bernhard
JUNIPER MPC5E-40G10G MPC5E CARD 6x40GE & 24x10GE, COUIBD1BAF
$3999.99
Juniper MX-MPC2-3D-A Router Card + MIC-3D-4XGE-XFP-A & MIC-3D-20GE-SFP
$799.99
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper QFX5110-48S-AFO Switch, 48X 1/10GBE with 4X 40/100G QSFP+ *MINOR DAMAGE*
$1299.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$41.28
Juniper Networks EX3400-48P 48x Gigabit PoE+ RJ45 2x 40Gb/s QSFP+ Switch
$166.24
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00
Juniper Networks EX3300-24P 24-Port PoE+ 4x SFP+ Network Switch TESTED
$79.99