Hello Bernhard!
Hardware ok by then? Size of RAM?
Did you test the RAM with the cheatcode "memtest" for some hours?
When I try to boot Knoppix 7.1 or 7.0.5 on an older Notebook (PIIIM, 1GHz) mounting KNOPPIX fails miserably with an error message that the file might be corrupt. Booting knoppix testcd does not reveal any errors and booting on a newer system (Pentium Dual Core E4500) is no Problem at all.
Does somebody have a clue, what might be the Problem and how to check it?
--
Bernhard
Hello Bernhard!
Hardware ok by then? Size of RAM?
Did you test the RAM with the cheatcode "memtest" for some hours?
Hi Werner,
> Hardware ok by then? Size of RAM?
most probably a hardware problem.
Booting old woody, mounting the cdrdom and trying md5sum /cdrom/KNOPPIX/KNOPPIX yields read error messages after about 20 minutes. I don't see any reason for that, but the cause might be due the 8-12x RW media, the drive or anything else ...
I don't know if I have the time to check every possible cause.
--
Bernhard
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$299.99
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
HP ProLiant BL460c Gen9 Blade 2x E5-2680v3 2.5GHz =24 Cores, No RAM/HDD
$100.00
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
DELL PowerEdge M520 Blade Server, 2x Intel Xeon E5-2407V2, 64GB RAM - "B"
$89.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCSB-B200-M5 Barebones CTO Blade Server No RAM, No CPU, No HD
$287.00
Nutanix X-CHS-2U2N-827HD+ Server 2x Blades * 4x E5-2640v4 2.4GHz * 256GB RAM
$400.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$219.00
DELL PowerEdge M630 Blade 2x E5-2699v3 2.3GHz =36 Cores 128GB H330 2x10Gb X520
$305.00