-
Time problem
I installed knoppix 7.2 on a USB and everything workds great...except it gives the wrong time. This would only be an annoyance except I need to have the correct timestamp on my files. I use multiple computers and OS's for my work and it is beneficial to know which of several is the most recent version of a file.
I've tried using the following:
dpkg-reconfigure tzdata
Current default time zone: 'America/Regina'
Local time is now: Wed Aug 13 10:40:20 CST 2014.
Universal Time is now: Wed Aug 13 16:40:20 UTC 2014.
Unfortunately the local time was 16:40. My actual time zone is CST so UTC-6 is correct. It seems to be acquiring the wrong UTC time.
I then used a time server (20 minutes later)
ntpdate -q nist1-nj2.ustiming.org
server 165.193.126.229, stratum 1, offset 21599.700910, delay 0.09451
13 Aug 11:00:51 ntpdate[4395]: step time server 165.193.126.229 offset 21599.700910 sec
BTW, as I said, I'm running knoppix on a USB. When running Fedora 20 on my harddrive there are no such problems so I do not think it is a hardware problem.
Thanks for any help someone might give.
-
You can use the cheatcode "tz=America/Regina". Take care of hint 9!
Have also a look at Micro-Remastering at this website.
-
The problem is that it does not set the UTC time correctly so setting "tz=America/Regina" gives me a local time for somewhere in the middle of the Pacific ocean. It so happens it sets the UTC time equal to what my local time actually happens to be. So my workaround is to set my local time=UTC. Then I get the correct local time. Weird!
-
The problem is that it does not set the UTC time correctly ..
Did you read hint 9? You must set the hardware clock within BIOS to UTC manually by yourself.
-
I get time set via ntpdate-debian. /etc/default/ntpdate edit the line NTPSERVERS="your ntp server" Verify the ntpdate file exist in /etc/network/if-up.d Now each time your nic becomes active or up. Your time will sync. I use pool.ntp.org for correct time.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2294.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD
$78.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD
$94.50
Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server
$899.99
Dell PowerEdge FC630 Xeon E5-2699 v4 256 GB DDR4 1U Server No Drives/No OS B9
$424.99
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$349.00