-
Time problem
I installed knoppix 7.2 on a USB and everything workds great...except it gives the wrong time. This would only be an annoyance except I need to have the correct timestamp on my files. I use multiple computers and OS's for my work and it is beneficial to know which of several is the most recent version of a file.
I've tried using the following:
dpkg-reconfigure tzdata
Current default time zone: 'America/Regina'
Local time is now: Wed Aug 13 10:40:20 CST 2014.
Universal Time is now: Wed Aug 13 16:40:20 UTC 2014.
Unfortunately the local time was 16:40. My actual time zone is CST so UTC-6 is correct. It seems to be acquiring the wrong UTC time.
I then used a time server (20 minutes later)
ntpdate -q nist1-nj2.ustiming.org
server 165.193.126.229, stratum 1, offset 21599.700910, delay 0.09451
13 Aug 11:00:51 ntpdate[4395]: step time server 165.193.126.229 offset 21599.700910 sec
BTW, as I said, I'm running knoppix on a USB. When running Fedora 20 on my harddrive there are no such problems so I do not think it is a hardware problem.
Thanks for any help someone might give.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
Dell UCSA-901 0101A6100-000-G SAS PCI-E Raid Controller Card
$149.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99