Results 1 to 5 of 5

Thread: Time problem

  1. #1

    Time problem

    I installed knoppix 7.2 on a USB and everything workds great...except it gives the wrong time. This would only be an annoyance except I need to have the correct timestamp on my files. I use multiple computers and OS's for my work and it is beneficial to know which of several is the most recent version of a file.

    I've tried using the following:

    dpkg-reconfigure tzdata

    Current default time zone: 'America/Regina'
    Local time is now: Wed Aug 13 10:40:20 CST 2014.
    Universal Time is now: Wed Aug 13 16:40:20 UTC 2014.

    Unfortunately the local time was 16:40. My actual time zone is CST so UTC-6 is correct. It seems to be acquiring the wrong UTC time.

    I then used a time server (20 minutes later)

    ntpdate -q nist1-nj2.ustiming.org
    server 165.193.126.229, stratum 1, offset 21599.700910, delay 0.09451
    13 Aug 11:00:51 ntpdate[4395]: step time server 165.193.126.229 offset 21599.700910 sec

    BTW, as I said, I'm running knoppix on a USB. When running Fedora 20 on my harddrive there are no such problems so I do not think it is a hardware problem.

    Thanks for any help someone might give.

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    You can use the cheatcode "tz=America/Regina". Take care of hint 9!

    Have also a look at Micro-Remastering at this website.

  3. #3
    The problem is that it does not set the UTC time correctly so setting "tz=America/Regina" gives me a local time for somewhere in the middle of the Pacific ocean. It so happens it sets the UTC time equal to what my local time actually happens to be. So my workaround is to set my local time=UTC. Then I get the correct local time. Weird!

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    The problem is that it does not set the UTC time correctly ..
    Did you read hint 9? You must set the hardware clock within BIOS to UTC manually by yourself.

  5. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    I get time set via ntpdate-debian. /etc/default/ntpdate edit the line NTPSERVERS="your ntp server" Verify the ntpdate file exist in /etc/network/if-up.d Now each time your nic becomes active or up. Your time will sync. I use pool.ntp.org for correct time.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Fortinet FortiGate FG-60D Firewall Security Appliance with Power Supply picture

Fortinet FortiGate FG-60D Firewall Security Appliance with Power Supply

$65.00



Cisco ASA 5505  Fast Ethernet Firewall with power supply picture

Cisco ASA 5505 Fast Ethernet Firewall with power supply

$24.99



Palo Alto Networks PA-200 Firewall Security Appliance picture

Palo Alto Networks PA-200 Firewall Security Appliance

$36.89



Check Point T-110 Security Appliance Firewall picture

Check Point T-110 Security Appliance Firewall

$49.00



CISCO ASA5505-BUN-K9 SECURITY FIREWALL UPGRADE  ASA5505 picture

CISCO ASA5505-BUN-K9 SECURITY FIREWALL UPGRADE ASA5505

$59.90



ASA5512-X CISCO ASA 5512-X ADAPTIVE NETWORK SECURITY/FIREWALL APPLIANCE picture

ASA5512-X CISCO ASA 5512-X ADAPTIVE NETWORK SECURITY/FIREWALL APPLIANCE

$69.00



Firewalla RED: Cyber Security Firewall Appliance picture

Firewalla RED: Cyber Security Firewall Appliance

$79.99



Genuine Fortinet Fortigate FG-60D Firewall Security Appliance  Fortigate 60D picture

Genuine Fortinet Fortigate FG-60D Firewall Security Appliance Fortigate 60D

$34.95



Barracuda Gigabit Rackmount PFsense Firewall Intel G3900a picture

Barracuda Gigabit Rackmount PFsense Firewall Intel G3900a

$166.24



pfSense® Firewall Router AES-NI Gigabyte GA-Q87TN Dual Gb i5-4570S 8GB 64GB SSD picture

pfSense® Firewall Router AES-NI Gigabyte GA-Q87TN Dual Gb i5-4570S 8GB 64GB SSD

$169.95