-
Senior Member
registered user
Thanks again, Werner.
The symlink doesn't seem to work,
Code:
root@Microknoppix:/etc# ls syslog-knoppix
ls: cannot access syslog-knoppix: No such file or directory
root@Microknoppix:/etc# ln -s /usr/sbin/rsyslogd /sbin/syslogd
ln: failed to create symbolic link `/sbin/syslogd': File exists
root@Microknoppix:/etc#
but I think I may be able to rework '/etc/init.d/knoppix-autoconfig
to get what I want. Just replacing log start with 7.2 code may be enough.
Thanks for the clues.
Last edited by utu; 08-20-2014 at 03:12 PM.
-
syslog-knoppix.conf not syslog-knoppix
failed to create symbolic link `/sbin/syslogd': File exists
Just looked again for it - this file doesn't exist within my DVD download of V7.4.0
What is the size and the timestamp of '/UNIONFS/sbin/syslogd'?
-
Senior Member
registered user
Code:
knoppix@Microknoppix:~$ sudo locate /sbin/syslogd
/KNOPPIX-DATA/sbin/syslogd
/UNIONFS/sbin/syslogd
knoppix@Microknoppix:~$ cd KNOPPIX-DATA/sbin/syslogd
bash: cd: KNOPPIX-DATA/sbin/syslogd: No such file or directory
knoppix@Microknoppix:~$ cd KNOPPIX-DATA/sbin/syslogd
bash: cd: KNOPPIX-DATA/sbin/syslogd: No such file or directory
knoppix@Microknoppix:~$ cd UNIONFS/sbin/syslogd
bash: cd: UNIONFS/sbin/syslogd: No such file or directory
knoppix@Microknoppix:~$ cd /sbin/syslogd
bash: cd: /sbin/syslogd: Not a directory
knoppix@Microknoppix:~$ ls
Desktop new.profile
dot.bashrc ok.mp3
Downloads scanlist
KNOPPIX1.components This.Knoppix.74.LiveUSB
Knoppix.7.3.Mark.4 vrms.txt
Knoppix.74.LiveDVD-size.LiveUSB.comments
knoppix@Microknoppix:~$ ls -l /sbin/syslogd
lrwxrwxrwx 1 root root 18 Aug 20 09:17 /sbin/syslogd -> /usr/sbin/rsyslogd
knoppix@Microknoppix:~$
9:17 was about two hours previously
-
Senior Member
registered user
An update on this saga:
.
1. Werner's suggestion for re-instating syslog in Knoppix 7's must
be applied before adding any overlays.
2. The Knoppix 7.2 .bashrc function indicated in my post #9 will not
work as is without modification in Knoppix 7.4. Adaptations which will
work are as follows:
Code:
# Excerpts from my Knoppix 7.4 .bashrc:
alias 'Syslog=sudo less /var/log/syslog' # requires syslog
at.Start(){ # echo time at Start (requires Syslog)
echo -e "at Start: \c"; Syslog | grep 'acpid: start' | awk '{ print $3 }'
}
Disconnects() { # Wifi disconnects since boot (requires Syslog)
echo -e "Time now: \c"; date | awk '{ print $4 }'
at.Start
echo -e "Wifi disconnects: \c"; Syslog | grep -c disconnecting
}
3. It may not be possible to estimate time to boot using syslog in
Knoppix 7.4.
4. Thanks again go to Werner for pointing out there are pitfalls in
using Knoppix's overlay process which must be observed.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 36T 2.60GHZ 768GB RAM No HDD
$1000.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M620 Blade Server
$39.99
DELL PowerEdge M630 Blade 2x E5-2687Wv3 3.1GHz =20 Cores 32GB H330 2x10Gb X520
$200.00