I have a laptop that I got from work, and installed Knoppix on a thumbdrive so I could use it for personal use. When I installed Knoppix, the laptop was a Dell and I installed Knoppix 6.4, everything worked fine out of the box. I got a new laptop, this time an HP, but everything still worked fine except for a few minor sound issues. I installed it on a 16 Gig thumbdrive, and surprisingly filled the Thumb drive up. So I got a new 64 gig one and have installed knoppix 7.2 on it. It works great except when connected to the docking station, which has 2 - 19" monitors, 1 connected with DVI and one with the analog connector. Linux boots fine, but when it tries to initiate the gui, it fails saying to try some cheat codes. I've tried several, but it haven't gotten anything to work. The 6.4 version works fine with the docking station. Can anyone give me any suggestions on getting this to work.
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.59
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.08
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.29
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
Cisco A03-D1TBSATA 1TB 7200rpm SATA 6gbps 2.5in Drive
$9.00
Western Digital Ultrastar DC HC510 8TB 3.5" SAS 12Gb/s 7200RPM HDD
$59.99
WD 5TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0050BBK-WESN
$78.99