I have a laptop that I got from work, and installed Knoppix on a thumbdrive so I could use it for personal use. When I installed Knoppix, the laptop was a Dell and I installed Knoppix 6.4, everything worked fine out of the box. I got a new laptop, this time an HP, but everything still worked fine except for a few minor sound issues. I installed it on a 16 Gig thumbdrive, and surprisingly filled the Thumb drive up. So I got a new 64 gig one and have installed knoppix 7.2 on it. It works great except when connected to the docking station, which has 2 - 19" monitors, 1 connected with DVI and one with the analog connector. Linux boots fine, but when it tries to initiate the gui, it fails saying to try some cheat codes. I've tried several, but it haven't gotten anything to work. The 6.4 version works fine with the docking station. Can anyone give me any suggestions on getting this to work.
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$477.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$174.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$271.00
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$114.99