I have a laptop that I got from work, and installed Knoppix on a thumbdrive so I could use it for personal use. When I installed Knoppix, the laptop was a Dell and I installed Knoppix 6.4, everything worked fine out of the box. I got a new laptop, this time an HP, but everything still worked fine except for a few minor sound issues. I installed it on a 16 Gig thumbdrive, and surprisingly filled the Thumb drive up. So I got a new 64 gig one and have installed knoppix 7.2 on it. It works great except when connected to the docking station, which has 2 - 19" monitors, 1 connected with DVI and one with the analog connector. Linux boots fine, but when it tries to initiate the gui, it fails saying to try some cheat codes. I've tried several, but it haven't gotten anything to work. The 6.4 version works fine with the docking station. Can anyone give me any suggestions on getting this to work.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP Proliant DL360 Gen9 1x E5-2620 V3 2.40GHZ 32GB DDR4-1866MHZ 2x 500W PSU
$105.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00