Ich habe Knoppix 7.4 auf der HD installiert. Es funktioniert weitgehend alles, ausser, dass PCMCIA-Karten erkannt werden und ggf. genutzt werden können (z.B. mit SD-Karten Adapter).
Welchen Linux-Befehl muesste ich eingeben, um die Hardwareerkennung für diese Karten neu zu starten; oder gibt es einen anderer Trick mit dem man das Teil zum Laufen bringen kann?
Per Google Translate:Originally Posted by ossobussi
PCMCIA card under Knoppix 7.4
I have Knoppix 7.4 installed on the HD. It works mostly everything, except that PCMCIA cards are recognized and able to be used (eg with SD card adapter).
What Linux command I would have to enter to restart the hardware detection for these cards; or is there another trick with which you can bring the part to work?
Posting Permissions
DELL PowerEdge VRTX Blade Server Chassis SEE NOTES
$610.00
HPE ProLiant BL460c Gen8 735151-B21 E5-v2 Blade Server LOADED w 512 GIGS MEMORY
$280.00
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$209.99
Dell PowerEdge M620 Blade Server Module BAREBONES (NO CPU, RAM, HDD, CADDY)
$34.99
Dell PowerEdge M520 Blade Server, 1x Intel Xeon E5-2420V2, NO RAM
$17.50
Dell PowerEdge FC830 blade server with 4x processors E5-4669v3 no memory
$189.00
DELL PowerEdge M910 Blade Server TWO E7-2870 2.4GHZ 256GB Memory NO HD
$210.00
ZimaBoard 432 Single Board Server / SATA Y adapter / DisplayPort to HMDI adapter
$90.00
Dell PowerEdge MX740C Blade Server CTO Chassis H730P
$299.00
CISCO UCSB-B200-M3 UCS B200 M3 BLADE SERVER 2x Xeon E5-2650 2GHz 256GB RAM
$169.00
Reply With Quote