-
Senior Member
registered user
Knoppix 7.4 flash-knoppix command-line example
.
Unbeknownst to some of us, Klaus K included a useful new command-line
feature in Version 7.4 Knoppixes.
This is to provide an example of a new capability in Knoppix 7.4 to create
a LiveUSB directly from a downloaded Knoppix LiveCD- or LiveDVD- iso,
without first actually making a LiveCD or LiveDVD for that iso.
Using a Knoppix 7.4 LiveCD, LiveDVD or LiveUSB command line
Code:
flash-knoppix KNOPPIX_V7.4.2DVD-2014-09-28-EN.iso
brings up a usage chart which will allow creating a 7.4.2 LiveUSB directly
from this iso definition, which if correct and found, doesn't itself need repeating.
The usage chart looks like this:
Code:
Usage: /usr/bin/flash-knoppix [-a] [-f] [-m i|p|n] [-p mb] [image|dir] [target_device]
-a Allow fixed disks
-f Force overwrite, no questions (batch mode)
-m i Method: Create overlay image
-m p Method: Create overlay partition (recommended)
-m n Method: No overlay (read only)
-p mb Overlay partition or image size in MB >= 200
image.iso Loopmount source ISO file
dir Source data directory containing files
target_device Destination block device (flash disk)
For my 16 Gb SanDisk at /dev/sdc and my iso at /media/sda3/isos, and
assuming 5 Gb for reiserfs persistence, the usage which worked was:
Code:
/usr/bin/flash-knoppix -m p -p 5000 /media/sda3/isos /dev/sdc
FWIW, I download & keep my isos on a Win7 ntfs partition.
-
@ utu
Thanks for your interesting tip, unknown to me and probably to many.
Now rather off topic, I notice that the text of your post covers less than half of the left-hand side of the page and the visible parts of the code boxes are shrunk and require much scrolling. This happens when reading with Firefox or Chromium, not with IE.
I also see this weird display with other contributors from time to time.
Regards.
Last edited by philo; 11-10-2014 at 09:22 PM.
-
Senior Member
registered user
Originally Posted by
philo
text of your post covers less than half of the left-hand side of the page and the visible parts of the code boxes are shrunk and require much scrolling.
I don't care for text running from side-to-side on an hd display, so I compose
off-line in a text editor usually.
I should probably learn how to shorten the width and extend the height of some
of the forum editor's forms; I have't take the time to do so.
Forum editor code & quote keywords help preserve whitespace, where it is useful in
conveying what's actually seen on a terminal.
Perhaps you can give us some good non-weird examples to guide our efforts.
I didn't see any among your 41 posts so far.
Last edited by utu; 11-11-2014 at 01:28 AM.
-
..and the visible parts of the code boxes are shrunk and require much scrolling.
This is not a bug of the Forum software.Whether you have to use horizontal scrolling or not for the code-box depends on your local situation: size of the monitor (for example 10 or 22 inch), of the used browser (most of them interprets HTML code a little different) and - very important - of the used font and fontsize within the different browsers.
-
@utu
I do not see this happening with any of 'my' own posts. But to illlustrate, it is the case with post #1 of this thread, but not witth posts #2,3 and 4 .
@ Werner
I use a 17" monitor and my font faces & sizes are normal.
It is only a trivial matter. Other readers of Knoppix forums must have had a similar experience at times but nobody bothered to report it...
-
Oh, I see. In posting #1 there are hard-coded line feeds at the end of the lines produced with an editor software. Other posters (me to) uses only paragraphs and let the HTML software do the automatic wordwrap.
If somebody creates his posting within an editor first, he should use an editor like for example Geany with the ability of visual linebreak.
I use a 17" monitor and my font faces & sizes are normal.
What is "normal"? If I use a fontsize 10 I don't need horizontal scrolling for the codebox of posting #1. but with fontsize 16 i have to scroll.
-
Hello, utu.
I'm on Knoppix 7.7 trying to create a LiveUSB on a 32Gb pendrive for Knoppix 8.1 using flash-knoppix.
My .iso file is here
knoppix@Microknoppix:~/Downloads/Torrents/KNOPPIX_V8.1-2017-09-05-EN$ ls
knoppix-cheatcodes.txt
KNOPPIX_V8.1-2017-09-05-EN.iso
My pendrive is here:
knoppix@Microknoppix:/media/sdc1$ pwd
/media/sdc1
When I type
/usr/bin/flash-knoppix -m p -p 20000 /home/knoppix/Downloads/Torrents/KNOPPIX_V8.1-2017-09-05-EN/KNOPPIX_V8.1-2017-09-05-EN.iso /media/sdc1
the OS says
mount: /media/sdc1: failed to setup loop device: Invalid argument
and when typing sdc instead of sdc1 it answers giving the usage of flash-knoppix.
Any suggestion, please?
-
@Porteņo: /media/sdc1 is the mountpoint where you have mounted the file system in partition 1 on the sdc device. /media/sdc does not exist.
flash-knoppix wants a device to write on, not a file system. I guess that all partitions on the device must be unmounted to make the device available for writing.
Try this:
umount /media/sdc1
/usr/bin/flash-knoppix -m p -p 20000 /home/knoppix/Downloads/Torrents/KNOPPIX_V8.1-2017-09-05-EN/KNOPPIX_V8.1-2017-09-05-EN.iso /dev/sdc
-
Thank you, it worked!
I'm having some issues with knoppix 8.1, after checking file integrity will ask to the community.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Intel Xeon Platinum 8180 LGA3647 CPU Processor QL1F 28 Core 56T 1.8-3.2GHZ
$159.00
HP Z420 Workstation Xeon E5-2690 v2 3ghz 10-Cores 64gb 512gb SSD 4TB Win10
$239.99
Intel Xeon Silver 4214 12-Core 2.20GHz FCLGA3647 CPU Processor - SRFB9
$129.99
Lenovo Thinkstation P510 E5-1620 V4 16GB RAM 512GB SSD DVD Quadro M2000 W10 Pro
$184.95
Intel Xeon E5-2680 v4 SR2N7 2.40GHz 35MB 14-Core LGA2011-3 CPU Processor
$14.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$4.05
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$32.79
Intel Xeon E7-8890 V4 2.20GHz 24-Core 60MB LGA2011 Server CPU Processor SR2SS
$29.99
Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor
$45.00
Matched Pair Intel Xeon E5-2697 V2 E5-2690 V2 E5-2680 V2 E5-2670 V2 LGA2011 CPU
$56.90