-
Indirect HDD install
Dear member,
I have installed Knoppix but like to install Suse Linux. A direct install while starting up doesn't work because the HDD can't be read.
But after mounting I have the openSUSE.iso in /media/sr0
"If you really want to boot an operating system inside a running Knoppix you can use qemu."
But qemu can't be found.
knoppix@Microknoppix:-$ qemu
bash: qemu: command not found
How can I solve this problem?
Thank you.
hansie
-
Yu have to use the wrappe script kvm if you want to run qemu.
If your processor supports virtualization and it is enabled by the BIOS you can use kvm. Check for support by:
Code:
egrep '(vmx|svm)' --color=always /proc/cpuinfo
If you get the result "vmx" type
otherwise if you get the result "svm" type
to load the kvm module.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
881507-001 HPE 2.4TB SAS 12G 10K SC 512E DS G8-G10 Hard Drive 881457-B21 F/S
$274.95
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.15
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95