-
Indirect HDD install
Dear member,
I have installed Knoppix but like to install Suse Linux. A direct install while starting up doesn't work because the HDD can't be read.
But after mounting I have the openSUSE.iso in /media/sr0
"If you really want to boot an operating system inside a running Knoppix you can use qemu."
But qemu can't be found.
knoppix@Microknoppix:-$ qemu
bash: qemu: command not found
How can I solve this problem?
Thank you.
hansie
-
Yu have to use the wrappe script kvm if you want to run qemu.
If your processor supports virtualization and it is enabled by the BIOS you can use kvm. Check for support by:
Code:
egrep '(vmx|svm)' --color=always /proc/cpuinfo
If you get the result "vmx" type
otherwise if you get the result "svm" type
to load the kvm module.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096
$79.99
Dell ST2000NX0403 2T SATA 2.5 inch 7.2K CK3MN server hard drive
$45.00
Toshiba 4TB, SATA 3, 3.5'' Internal Hard Drive (MG03ACA400)
$48.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.88
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$69.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Western Digital WD10JUCT 1TB 2.5" SATA 3Gb/s 5400 RPM 16MB Laptop Hard Drive
$17.98
HGST 0F27352 10TB 3.5" SAS 7200 RPM 12Gb/s Hard Drive 100% #73 v
$65.00