-
Indirect HDD install
Dear member,
I have installed Knoppix but like to install Suse Linux. A direct install while starting up doesn't work because the HDD can't be read.
But after mounting I have the openSUSE.iso in /media/sr0
"If you really want to boot an operating system inside a running Knoppix you can use qemu."
But qemu can't be found.
knoppix@Microknoppix:-$ qemu
bash: qemu: command not found
How can I solve this problem?
Thank you.
hansie
-
Yu have to use the wrappe script kvm if you want to run qemu.
If your processor supports virtualization and it is enabled by the BIOS you can use kvm. Check for support by:
Code:
egrep '(vmx|svm)' --color=always /proc/cpuinfo
If you get the result "vmx" type
otherwise if you get the result "svm" type
to load the kvm module.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.41
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.14
Western Digital Ultrastar DC HC510 8TB 3.5" SAS 12Gb/s 7200RPM HDD
$59.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Western Digital 10TB 3.5" SATA 6Gb/s RED WD100EFAX Hard Disk Drive
$129.99