-
Indirect HDD install
Dear member,
I have installed Knoppix but like to install Suse Linux. A direct install while starting up doesn't work because the HDD can't be read.
But after mounting I have the openSUSE.iso in /media/sr0
"If you really want to boot an operating system inside a running Knoppix you can use qemu."
But qemu can't be found.
knoppix@Microknoppix:-$ qemu
bash: qemu: command not found
How can I solve this problem?
Thank you.
hansie
-
Yu have to use the wrappe script kvm if you want to run qemu.
If your processor supports virtualization and it is enabled by the BIOS you can use kvm. Check for support by:
Code:
egrep '(vmx|svm)' --color=always /proc/cpuinfo
If you get the result "vmx" type
otherwise if you get the result "svm" type
to load the kvm module.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
HPE 863442-B21 ProLiant BL460c G10 Blade (2) Intel Xeon Silver CPUs NO HD/NO RAM
$319.00
HPE ProLiant BL460c Gen9 16-Core Blade 779803-S01 (2)CPU on board No RAM/No HDD
$89.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99