Hi! I had a similar problem, but I solved it by definig a Gateway. I'm a newbie, so I don't know how to add one permanently, but you can define one temporarily with the command "route add default gw [your gateway's IP-Address]"
I'm new to knoppix and in this forum.
I basically have the same problem. My network card is detected and has a static IP but it cannot see other hosts like my ipcop gateway box.
All other boxes can connect to the net. If I boot to WinXP on secondary 10GB hd, I can connect using same static IP so I can say card/system is good. I tried working network config settings to no avail.
I'll try to run netcardconfig and dmesg tonight and post results here.
BTW, this forum does not support Netscape 4.7x?
Thanks.
:?
Hi! I had a similar problem, but I solved it by definig a Gateway. I'm a newbie, so I don't know how to add one permanently, but you can define one temporarily with the command "route add default gw [your gateway's IP-Address]"
I run netcardconfig and choose "use dhcp" to get it working.
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$349.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
$599.99
$169.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$105.59
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00