Just adding the line:
@xbacklight = 30 [or more or less]
in:
/.config/lxsession/LXDE/autostart
would not do?
.
I've seen the light with uefi, but it's too bright for me.
I have two Dell Inspiron laptops: One is a Win7 Model 1545 with Legacy boot,
the other a Win8 Model 3520 with uefi boot.
A Knoppix 7.4.2 LiveUSB with reiserfs persistence developed on the 1545 works
as well on the 3520 with one peculiar exception. The backlight on the 3520 is
uncomfortably bright.
My first attempt to correct this situation was to add a line in /etc/rc.local
commanding 'sudo /usr/bin/xbacklight 60' which works at a command line. But
it doesn't work at rc.local. Apparently /etc/rc.local does not apply after
all other init processes are done, after all.
I recall that it was convenient to use /etc/X11/Xsession.d/45knoppix as a
vehicle to remedy other things that rc.local no longer cured. So I've located
my xbacklight command in 45knoppix as well, and it serves the purpose.
So, I offer this Knoppix work-around if Win8 illumination is just too bright
to accept.
Just adding the line:
@xbacklight = 30 [or more or less]
in:
/.config/lxsession/LXDE/autostart
would not do?
Greetings, Philo.
Thanks for the nice alternative. As you point out,
~/.config/lxsession/LXDE/@autostart -set 60
does the same thing as the 45knoppix workaround.
I have in mind adding a little bash line that decides whether
I want the Win7 or the Win8 machine to get this workaround.
I think 45knoppix may make it easier to pull that off,
unless you've got more magic to show us.
LOT OF 10 HPE JD092B X130 10G SFP+ LC SR Transceiver
$40.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module
$19.99
For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T
$49.99
NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1 Unit)
$39.95
HP 10Gb SR SFP+ 10GBASE-SR 455885-001 10Gigabit Ethernet Transceiver 456096-001
$6.99
🔥🔥🔥SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GB SFP+ Multi Module🔥🔥
$6.80
Precision PRE-SFP-TMI-CSCO 1GB BASE-T RJ-45 SFP Transceiver - For Cisco
$2.89
New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in Transceiver Module
$15.00
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$42.00