Just adding the line:
@xbacklight = 30 [or more or less]
in:
/.config/lxsession/LXDE/autostart
would not do?
.
I've seen the light with uefi, but it's too bright for me.
I have two Dell Inspiron laptops: One is a Win7 Model 1545 with Legacy boot,
the other a Win8 Model 3520 with uefi boot.
A Knoppix 7.4.2 LiveUSB with reiserfs persistence developed on the 1545 works
as well on the 3520 with one peculiar exception. The backlight on the 3520 is
uncomfortably bright.
My first attempt to correct this situation was to add a line in /etc/rc.local
commanding 'sudo /usr/bin/xbacklight 60' which works at a command line. But
it doesn't work at rc.local. Apparently /etc/rc.local does not apply after
all other init processes are done, after all.
I recall that it was convenient to use /etc/X11/Xsession.d/45knoppix as a
vehicle to remedy other things that rc.local no longer cured. So I've located
my xbacklight command in 45knoppix as well, and it serves the purpose.
So, I offer this Knoppix work-around if Win8 illumination is just too bright
to accept.
Just adding the line:
@xbacklight = 30 [or more or less]
in:
/.config/lxsession/LXDE/autostart
would not do?
Greetings, Philo.
Thanks for the nice alternative. As you point out,
~/.config/lxsession/LXDE/@autostart -set 60
does the same thing as the 45knoppix workaround.
I have in mind adding a little bash line that decides whether
I want the Win7 or the Win8 machine to get this workaround.
I think 45knoppix may make it easier to pull that off,
unless you've got more magic to show us.
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
lot of 10 Juniper EX-SFP-10GE-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM -J499
$220.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX2200-C-12P-2G 12 Port Gigabit PoE 2 T/SFP 1G Network Switch
$129.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
EX2300-24P Juniper 24-port 10/100/1000BASE-T PoE+ 4 x 1/10GbE SFP/SFP+ UNCLAIMED
$450.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$41.43
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
JUNIPER EX4550-32F-AFO 32-PORT ETHERNET SWITCH 2x POWER SUPPLY - TESTED
$299.99
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00