-
Senior Member
registered user
Knoppix 7.4.2 dazzles using uefi.
.
I've seen the light with uefi, but it's too bright for me.
I have two Dell Inspiron laptops: One is a Win7 Model 1545 with Legacy boot,
the other a Win8 Model 3520 with uefi boot.
A Knoppix 7.4.2 LiveUSB with reiserfs persistence developed on the 1545 works
as well on the 3520 with one peculiar exception. The backlight on the 3520 is
uncomfortably bright.
My first attempt to correct this situation was to add a line in /etc/rc.local
commanding 'sudo /usr/bin/xbacklight 60' which works at a command line. But
it doesn't work at rc.local. Apparently /etc/rc.local does not apply after
all other init processes are done, after all.
I recall that it was convenient to use /etc/X11/Xsession.d/45knoppix as a
vehicle to remedy other things that rc.local no longer cured. So I've located
my xbacklight command in 45knoppix as well, and it serves the purpose.
So, I offer this Knoppix work-around if Win8 illumination is just too bright
to accept.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Juniper EX3300-48P 48 Port PoE+ Gigabit Switch - Same Day Shipping
$249.99

Juniper EX2300-24P PoE+ 24-Port 1GbE 4-Port SFP+ Switch TESTED
$124.99

Juniper QFX5200-32C-AFO QFX5200 32 port 100 Gigabit QSFP28 Switch
$545.00

Juniper EX4300-48T 48 Port Gigabit 4 QSFP 40G Dual PSU AFO w/EX-UM-4X4SFP Module
$99.00

Juniper Networks EX2200-C Ethernet Switch Unit -
$49.99

Juniper Networks MX150 Universal Router with 8x 1G 2x SFP 2x SFP+ Ports
$450.00

Juniper EX-UM-4X4SFP 4 Port 1GbE/10GbE SFP+ Uplink Module
$25.00

Juniper EX4100-48MP 48 Port, PoE++ (up to 90 W) 16x100 MB - Multigigabit - NOB
$2995.00

Juniper QFX5100-48S-AFI 48x SFP+/SFP 6x QSFP QFX5100 Switch+4 Post KIT-Rails
$355.00

Juniper NFX250-S2 10-Port GbE & 2-Port SFP+ Layer 2 Network Services Platform
$254.99