Are there error messages using the cheatcode "knoppix testcd noimage" (omit "lang=es")?
I'm using v7.4.2 in a pendrive made with flash-knoppix. After typing knoppix lang=es and entering the password only a black screen is shown. Same behaviour with keyboard=es.
Is there some workaround for this?
Thanks,
Eduardo
Are there error messages using the cheatcode "knoppix testcd noimage" (omit "lang=es")?
After telling
Knoppix 7.4 found at: /dev/sdb1
Checking Knoppix/Knoppix...
a few minutes later the OS shows a black screen and gives no other sign of being alive. It no even asks for a password.
It looks like a hardware error. Did you test RAM with the cheatcode "memtest" (not "knoppix memtest") for some hours?
Will use another netbook, same model, and then I'll tell you. But cheatcodes worked fine with v7.2...
Now I used both netbooks, but kept watching the screen:
Knoppix 7.4 found at: /dev/sdb1
Checking Knoppix/Knoppix...
ALL FILES OK
...
The graphical environment...
And then the black screen.
Can you switch to a console using [Ctrl Alt F2] and see anything? If so, typeand try some of the other cheatcodes to find a solution for your graphic chip. "memtest" had no errors?Code:su reboot
The OS does not respond to Ctrl Alt F2.
Will run memtest tonight.
Thanks, Werner.
After a time far from Knoppix because of a Synaptic problem, I’m using it again as my main OS.
When I enter cheat codes "knoppix keyboard=es xkeyboard=es" Spanish keyboatd works fine, but with
LABEL knoppix
KERNEL linux
APPEND lang=en keyboard=es xkeyboard=es apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
in /mnt-system/boot/syslinux/syslinux.cfg
it doesn’t.
Is this the file I have to edit?
Thanks.
Which Knoppix version? Which installation - "Flash disk install" or "HD install"?
Have also a look at the end of Cheat Codes → Micro-Remastering.
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell Poweredge FC630 Blade Server BAREBONES No CPU, No HDD, No RAM
$75.00
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99