Are there error messages using the cheatcode "knoppix testcd noimage" (omit "lang=es")?
I'm using v7.4.2 in a pendrive made with flash-knoppix. After typing knoppix lang=es and entering the password only a black screen is shown. Same behaviour with keyboard=es.
Is there some workaround for this?
Thanks,
Eduardo
Are there error messages using the cheatcode "knoppix testcd noimage" (omit "lang=es")?
After telling
Knoppix 7.4 found at: /dev/sdb1
Checking Knoppix/Knoppix...
a few minutes later the OS shows a black screen and gives no other sign of being alive. It no even asks for a password.
It looks like a hardware error. Did you test RAM with the cheatcode "memtest" (not "knoppix memtest") for some hours?
Will use another netbook, same model, and then I'll tell you. But cheatcodes worked fine with v7.2...
Now I used both netbooks, but kept watching the screen:
Knoppix 7.4 found at: /dev/sdb1
Checking Knoppix/Knoppix...
ALL FILES OK
...
The graphical environment...
And then the black screen.
Can you switch to a console using [Ctrl Alt F2] and see anything? If so, typeand try some of the other cheatcodes to find a solution for your graphic chip. "memtest" had no errors?Code:su reboot
The OS does not respond to Ctrl Alt F2.
Will run memtest tonight.
Thanks, Werner.
After a time far from Knoppix because of a Synaptic problem, I’m using it again as my main OS.
When I enter cheat codes "knoppix keyboard=es xkeyboard=es" Spanish keyboatd works fine, but with
LABEL knoppix
KERNEL linux
APPEND lang=en keyboard=es xkeyboard=es apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
in /mnt-system/boot/syslinux/syslinux.cfg
it doesn’t.
Is this the file I have to edit?
Thanks.
Which Knoppix version? Which installation - "Flash disk install" or "HD install"?
Have also a look at the end of Cheat Codes → Micro-Remastering.
Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF
$335.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile
$19.99
Cisco SFP-10G-BX40D-I 10GBASE-BX-D BiDi SFP+, 1330nm-TX/1270nm-RX, 40km, LC, SMF
$59.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER
$11.90
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module
$6.80