-
Sorry, I forgot to tell, could be I'm the target of some Dr. Alzheimer attack. Knoppix version: 7.4.2 Installation: Flash disk install I've just seen the last part of Cheat Codes → Micro-Remastering. What should I look for?
Last edited by Porteño; 06-25-2015 at 06:48 PM.
Reason: Formatting
-
@ Porteño
There may be more than one lines needed to be changed in the syslinux.cfg file. If KNOPPIX is booted with 64-bit architecture, syslnx32.cfg and syslnx64.cfg also need to be amended; just got that info from the footnote of Micro-Remastering section. Another quick way to see if the cheatcodes have passed through successfully is to check the content of /proc/cmdline
If the cheatcodes do pass through but the keyboard isn't of Spanish layout, then... sorry... cannot be of any help....
-
lang=en? You can always open a root terminal and type: setxkbmap es
-
Thanks, @jalb, it works fine. Is there some way to avoid typing it every time I begin Knoppix?
Of course I did what is said in Microremastering, but can't get it working.
-
Thanks @superman.
The output for cat/proc/cmdline includes "keyboard=es xkeyboard=es" when I enter the cheat code keyboard=es, and doesn't include them when I don't.
I'm wondering about
There may be more than one lines needed to be changed in the syslinux.cfg file.
I only added "keyboard=es xkeyboard=es" to syslinux.cfg here:
Code:
LABEL knoppix
KERNEL linux
APPEND lang=en keyboard=es xkeyboard=es apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
-
I am not using the 64 version, my CPU is
cpu:
Intel(R) Atom(TM) CPU N455 @ 1.66GHz, 1666 MHz
Intel(R) Atom(TM) CPU N455 @ 1.66GHz, 1666 MHz
bridge:
Intel Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
Intel NM10/ICH7 Family PCI Express Port 1
Intel NM10/ICH7 Family PCI Express Port 2
Intel NM10/ICH7 Family PCI Express Port 3
Intel 82801 Mobile PCI Bridge
Intel NM10 Family LPC Controller
-
Try with lang=es In some computers it doesn't work and I forgot which líne to change and where, sorry.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
HPE 863442-B21 ProLiant BL460c G10 Blade (2) Intel Xeon Silver CPUs NO HD/NO RAM
$319.00
HPE ProLiant BL460c Gen9 16-Core Blade 779803-S01 (2)CPU on board No RAM/No HDD
$89.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00