Greetings,
I would kindly like to request some help with installing some drivers using Knoppix v7.4.2.
I have a desktop with the following configuration:
Super Micro Computer's X10DAC motherboard with Dual Xeon E5-2637 V2Processors, 15MB Cache
nVidia Quadro K2000 with 2GB GDDR5 SDRAM memory
256GB SSD Drive for the OS
LSI 3008-IR SAS Controller with 4 10K RPM SAS Drives
However the manufacturer did not install an OS or any drivers.
I at the very least I need to install the LAN drivers so that I can image the machine from the Network to Windows 7 using PE boot media.
I would kindly like to request some assistance on how to install the LAN Drivers (which I have obtained from Super Micro Computer's website) using Knoppix v7.4.2
Any help would be greatly appreciated.
Thank you,
Sayeed
P.S. does any one know if the LSI 3008-IR is compatible with Microsoft bitlocker, The SAS Drives need to be configured with RAID 10.![]()
JUNIPER ELECTRONICS NFX250-ATT-LS1
$250.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$29.91
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
Juniper Networks SRX345 Gateway Appliance
$195.00
Juniper 48-Port PoE GbE Network Switch w/ 4-Port 10GB SFP+ Module EX4300-48P
$179.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$140.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper EX2200-C-12T-2G Fanless 12-port Ethernet Switch with 2 SFP
$75.77
Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance
$45.00