Greetings,
I would kindly like to request some help with installing some drivers using Knoppix v7.4.2.
I have a desktop with the following configuration:
Super Micro Computer's X10DAC motherboard with Dual Xeon E5-2637 V2Processors, 15MB Cache
nVidia Quadro K2000 with 2GB GDDR5 SDRAM memory
256GB SSD Drive for the OS
LSI 3008-IR SAS Controller with 4 10K RPM SAS Drives
However the manufacturer did not install an OS or any drivers.
I at the very least I need to install the LAN drivers so that I can image the machine from the Network to Windows 7 using PE boot media.
I would kindly like to request some assistance on how to install the LAN Drivers (which I have obtained from Super Micro Computer's website) using Knoppix v7.4.2
Any help would be greatly appreciated.
Thank you,
Sayeed
P.S. does any one know if the LSI 3008-IR is compatible with Microsoft bitlocker, The SAS Drives need to be configured with RAID 10.![]()
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
CISCO UCSB-B200-M5 UCS B200 M5 BLADE SERVER - CAN BUILD TO SPEC
$495.00
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$275.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$59.99
HP ProLiant BL460c Gen9 Blade Server Intel Xeon E5-2698 v3 - 512GB RAM
$255.42
Sun Microsystems Blade 100 Workstation UltraSPARC-IIe 500MHz 256MB Server No HDD
$95.00
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
HP ProLiant BL460c Gen9 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB P246 650FLB
$267.00
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99