Greetings,
I would kindly like to request some help with installing some drivers using Knoppix v7.4.2.
I have a desktop with the following configuration:
Super Micro Computer's X10DAC motherboard with Dual Xeon E5-2637 V2Processors, 15MB Cache
nVidia Quadro K2000 with 2GB GDDR5 SDRAM memory
256GB SSD Drive for the OS
LSI 3008-IR SAS Controller with 4 10K RPM SAS Drives
However the manufacturer did not install an OS or any drivers.
I at the very least I need to install the LAN drivers so that I can image the machine from the Network to Windows 7 using PE boot media.
I would kindly like to request some assistance on how to install the LAN Drivers (which I have obtained from Super Micro Computer's website) using Knoppix v7.4.2
Any help would be greatly appreciated.
Thank you,
Sayeed
P.S. does any one know if the LSI 3008-IR is compatible with Microsoft bitlocker, The SAS Drives need to be configured with RAID 10.
Cisco SFP-10G-T-S 10GBASE-T SFP+, 30m@Cat6a/Cat7, Copper, RJ45
$83.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Cisco SFP-10G-BX40D-I 10GBASE-BX-D BiDi SFP+, 1330nm-TX/1270nm-RX, 40km, LC, SMF
$59.99
Cisco GLC-TE 1000BASE-T SFP, 100m, Copper, RJ45
$27.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95