Since 2.6.39 (the last kernel I successfully built and included in my K5.3.1 remaster) a lot of things changed.
Back then I still built the cloop and aufs modules separately, whereas now (K7.4.2) I see they are kernel builtin.
It's a lot easier this way, that's true! As far as I understand, the only extra module being built is virtualbox (?).
The main point of interest for me with K7.4.2 is to activate PAE in the 32 bit kernel, so I can use 100% of 4GB RAM or more (for instance I have a few Core2 mainboards with 8GB RAM) without having to use a 64 bit Linux.
So I concocted (by trial and error) the following script, which is to be executed (as root of course) in /usr/src:
I personally tested this script and it successfully rebuilt the 32 bit kernel for me in Knoppix 7.4.2.Code:#!/bin/sh ### TEST SCRIPT - REBUILD THE KNOPPIX 7.4.2 KERNEL AFTER MODIFYING THE KERNEL CONFIGURATION. ### THE GOAL IS TO REBUILD THE 32 bit KERNEL AS DEBIAN PACKAGES WHICH CAN BE INSTALLED LATER ON. ### IN THIS PARTICULAR CASE WE AIM FOR PAE ACTIVATION IN THE KERNEL AND DEACTIVATION OF ### CPU MICROCODE UPDATE SUPPORT. ### this was the kernel building command used by Klaus K on Knoppix 6.7.1 # make CONCURRENCY_LEVEL=8 ARCH=i386 bzImage modules && rm -rf debian; CONCURRENCY_LEVEL=8 ARCH=i386 MODULE_LOC=`pwd`/../modules fakeroot make-kpkg --append-to-version=-pae --us --uc kernel_image modules_image kernel_headers kernel_source ### but the second part (make-kpkg) fails with K7.4.2 # run this script in /usr/src echo -n "extracting K7.4.2 kernel sources... " && tar -xjf linux-source-3.16.3.tar.bz2 && echo "done." echo -n "extracting virtualbox module sources... " && tar -xjf virtualbox-guest.tar.bz2 && echo "done." cd linux-source-3.16.3 echo -e "\n\n======================= make kernel clean ============================\n" make-kpkg clean echo -e "\n\n======================= make modules clean ===========================\n" make-kpkg modules_clean # copy original Knoppix 7.4.2 kernel config here echo -e "\n\n=============== get original K742 kernel config ======================\n" cp -fpv /boot/config-3.16.3 ./.config # change to "EXTRAVERSION = -pae" in Makefile echo -e "\n\n=========== set custom kernel EXTRAVERSION in Makefile ===============\n" sed -i -e "s/^EXTRAVERSION \=.*$/EXTRAVERSION = -pae/" Makefile # modify kernel configuration manually: activate PAE and deactivate CPU microcode support. # in the config menu set the following: # Processor type and features: # Processor family (Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon) ---> # < > CPU microcode loading support # High Memory Support (64GB) ---> # the first and third setting above will automatically give the next one: # -*- PAE (Physical Address Extension) Support make oldconfig menuconfig # now let's do the actual recompilation: # make CONCURRENCY_LEVEL=8 ARCH=i386 oldconfig bzImage modules # this works but then make-kpkg fails make CONCURRENCY_LEVEL=8 ARCH=i386 oldconfig bzImage deb-pkg # THIS WORKED!!! # now we should have the kernel .deb packages rebuilt in /usr/src exit 0
I mean it generated 4 debian packages which can be installed anytime beside the already existing 2 kernels in K742, or replace the original 32 bit kernel shipped with the K742 DVD.
Then I also tested it (without remastering anything): I unpacked the minirt.gz and modified the /init script so it unpacks the "linux-image-3.16.3-pae_3.16.3-pae-1_i386.deb" in /UNIONFS/ right before /sbin/init is executed.Code:linux-firmware-image-3.16.3-pae_3.16.3-pae-1_i386.deb linux-headers-3.16.3-pae_3.16.3-pae-1_i386.deb linux-image-3.16.3-pae_3.16.3-pae-1_i386.deb linux-libc-dev_3.16.3-pae-1_i386.deb
I named the new miniroot "minirt-pae.gz". And of course I added an extra entry to isolinux.cfg:
And I actually started Knoppix 7.4.2 with a PAE-enabled 3.16.3 kernel, rebuilt from the sources shipped with the original K7.4.2 DVD !!Code:LABEL knoppix-pae KERNEL vmlinuz-3.16.3-pae APPEND lang=en apm=power-off initrd=minirt-pae.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 no3d alsa
As far as I can tell, everything works fine.
What I would like though is somebody else's opinion (I don't know if Klaus Knopper will have the time for this) who has some recent experience with kernel building.
What do you think? Is this method OK according to the current books or not?
Did I miss anything? Did I do anthing wrong?
And another thing: the "linux-source-3.16.3.tar.bz2" archive shipped with the DVD, is that the kernel source AFTER the K7.4.2 kernel compilation (and then make cleaned), or BEFORE (the original Debian packaged kernel)?
I would think it's the kernel source before compilation but I don't really know. I guess Klaus only can answer that...
Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th)
$59.99
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard
$84.99
Asus Prime H310M-A R2.0 Intel LGA 1151 DDR4 Desktop Motherboard
$54.99
Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3
$23.99
ASRock H170 Pro4S Motherboard ATX Intel H170 LGA1151 DDR4 SATA3 HDMI
$39.99
GIGABYTE GA-H110MSTX-HD3 H110 DP LGA1151 I-SERIES MAX-32GB DDR4 MINI-STX W/IO
$24.95
Asus Prime A320M-K mATX AM4 Motherboard (Ryzen 1000-5000 Ready)
$49.99
Gigabyte M-ATX motherboard with Intel Core i3 8100 CPU and 8GB DDR4 RAM
$84.00
ASUS B85M-E Motherboard Intel B85 (4th Gen) LGA1150 DDR3 microATX
$39.99