Since 2.6.39 (the last kernel I successfully built and included in my K5.3.1 remaster) a lot of things changed.
Back then I still built the cloop and aufs modules separately, whereas now (K7.4.2) I see they are kernel builtin.
It's a lot easier this way, that's true! As far as I understand, the only extra module being built is virtualbox (?).
The main point of interest for me with K7.4.2 is to activate PAE in the 32 bit kernel, so I can use 100% of 4GB RAM or more (for instance I have a few Core2 mainboards with 8GB RAM) without having to use a 64 bit Linux.
So I concocted (by trial and error) the following script, which is to be executed (as root of course) in /usr/src:
I personally tested this script and it successfully rebuilt the 32 bit kernel for me in Knoppix 7.4.2.Code:#!/bin/sh ### TEST SCRIPT - REBUILD THE KNOPPIX 7.4.2 KERNEL AFTER MODIFYING THE KERNEL CONFIGURATION. ### THE GOAL IS TO REBUILD THE 32 bit KERNEL AS DEBIAN PACKAGES WHICH CAN BE INSTALLED LATER ON. ### IN THIS PARTICULAR CASE WE AIM FOR PAE ACTIVATION IN THE KERNEL AND DEACTIVATION OF ### CPU MICROCODE UPDATE SUPPORT. ### this was the kernel building command used by Klaus K on Knoppix 6.7.1 # make CONCURRENCY_LEVEL=8 ARCH=i386 bzImage modules && rm -rf debian; CONCURRENCY_LEVEL=8 ARCH=i386 MODULE_LOC=`pwd`/../modules fakeroot make-kpkg --append-to-version=-pae --us --uc kernel_image modules_image kernel_headers kernel_source ### but the second part (make-kpkg) fails with K7.4.2 # run this script in /usr/src echo -n "extracting K7.4.2 kernel sources... " && tar -xjf linux-source-3.16.3.tar.bz2 && echo "done." echo -n "extracting virtualbox module sources... " && tar -xjf virtualbox-guest.tar.bz2 && echo "done." cd linux-source-3.16.3 echo -e "\n\n======================= make kernel clean ============================\n" make-kpkg clean echo -e "\n\n======================= make modules clean ===========================\n" make-kpkg modules_clean # copy original Knoppix 7.4.2 kernel config here echo -e "\n\n=============== get original K742 kernel config ======================\n" cp -fpv /boot/config-3.16.3 ./.config # change to "EXTRAVERSION = -pae" in Makefile echo -e "\n\n=========== set custom kernel EXTRAVERSION in Makefile ===============\n" sed -i -e "s/^EXTRAVERSION \=.*$/EXTRAVERSION = -pae/" Makefile # modify kernel configuration manually: activate PAE and deactivate CPU microcode support. # in the config menu set the following: # Processor type and features: # Processor family (Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon) ---> # < > CPU microcode loading support # High Memory Support (64GB) ---> # the first and third setting above will automatically give the next one: # -*- PAE (Physical Address Extension) Support make oldconfig menuconfig # now let's do the actual recompilation: # make CONCURRENCY_LEVEL=8 ARCH=i386 oldconfig bzImage modules # this works but then make-kpkg fails make CONCURRENCY_LEVEL=8 ARCH=i386 oldconfig bzImage deb-pkg # THIS WORKED!!! # now we should have the kernel .deb packages rebuilt in /usr/src exit 0
I mean it generated 4 debian packages which can be installed anytime beside the already existing 2 kernels in K742, or replace the original 32 bit kernel shipped with the K742 DVD.
Then I also tested it (without remastering anything): I unpacked the minirt.gz and modified the /init script so it unpacks the "linux-image-3.16.3-pae_3.16.3-pae-1_i386.deb" in /UNIONFS/ right before /sbin/init is executed.Code:linux-firmware-image-3.16.3-pae_3.16.3-pae-1_i386.deb linux-headers-3.16.3-pae_3.16.3-pae-1_i386.deb linux-image-3.16.3-pae_3.16.3-pae-1_i386.deb linux-libc-dev_3.16.3-pae-1_i386.deb
I named the new miniroot "minirt-pae.gz". And of course I added an extra entry to isolinux.cfg:
And I actually started Knoppix 7.4.2 with a PAE-enabled 3.16.3 kernel, rebuilt from the sources shipped with the original K7.4.2 DVD !!Code:LABEL knoppix-pae KERNEL vmlinuz-3.16.3-pae APPEND lang=en apm=power-off initrd=minirt-pae.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 no3d alsa
As far as I can tell, everything works fine.
What I would like though is somebody else's opinion (I don't know if Klaus Knopper will have the time for this) who has some recent experience with kernel building.
What do you think? Is this method OK according to the current books or not?
Did I miss anything? Did I do anthing wrong?
And another thing: the "linux-source-3.16.3.tar.bz2" archive shipped with the DVD, is that the kernel source AFTER the K7.4.2 kernel compilation (and then make cleaned), or BEFORE (the original Debian packaged kernel)?
I would think it's the kernel source before compilation but I don't really know. I guess Klaus only can answer that...
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$115.94
HP Z230 Workstation Towers Xeon E3-1231 V3 3.20ghz 8GB Ram NO HDD
$39.96
Dell Precision T3600 XEON E5-1607 3.0GHz 16GB RAM 500GB HD WIN10 Pro Workstation
$99.00
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$4.50
Genuine Intel Xeon E5-2680V4 2.40Ghz 14-Core 35MB LGA2011 CPU P/N: SR2N7
$14.99
Intel Xeon E5-2699 v3 2.3GHz 18-Core 45MB 145W LGA2011-3 CPU/Processor SR1XD
$40.99
Intel Xeon E5-2695 V4 @2.10GHz SR2J1 Socket LGA2011 18-Core Server CPU Processor
$40.40
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
Intel Xeon E5-2697 v4 2.3GHz 18-Core Processor CPU LGA2011 SR2JV
$49.99