Greetings,
I would kindly like to request some help with installing some drivers using Knoppix v7.4.2.
I have a desktop with the following configuration:
Super Micro Computer's X10DAC motherboard with Dual Xeon E5-2637 V2Processors, 15MB Cache
nVidia Quadro K2000 with 2GB GDDR5 SDRAM memory
256GB SSD Drive for the OS
LSI 3008-IR SAS Controller with 4 10K RPM SAS Drives
However the manufacturer did not install an OS or any drivers.
I at the very least I need to install the LAN drivers so that I can image the machine from the Network to Windows 7 using PE boot media.
I would kindly like to request some assistance on how to install the LAN Drivers (which I have obtained from Super Micro Computer's website) using Knoppix v7.4.2
Any help would be greatly appreciated.
Thank you,
Sayeed
P.S. does any one know if the LSI 3008-IR is compatible with Microsoft bitlocker, The SAS Drives need to be configured with RAID 10.
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
lot of 10 Juniper EX-SFP-10GE-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM -J499
$209.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.10
Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch
$999.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper QFX5100-48S-3AFO Switch 48 x 10Gb SFP+, 6x QSFP 40GE, Dual AC Power
$499.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00