Results 1 to 6 of 6

Thread: Static DNS manual networking

  1. #1
    Junior Member registered user
    Join Date
    Jun 2003
    Posts
    22

    Static DNS manual networking

    Hi everyone,

    I am on a large network and i am having problems finding where i manually enter the static DNS. I am not using DHCP due to new hardware that is conflicting with my DHCP server. I just need to know how i find out my current IP address on the knoppix machine, and also how to put in a static DNS address. Also what are all the other address it wants me to put in?? Is one of them the DNS with a different name..??




    Thanks,



    P.S i am a newbie to Linux. (I am jsut starting the R&D to make many servers here)

  2. #2
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    ifconfig eth0 will tell you the current config of eth0 the files you want are in /etc/resolv.conf and /etc/network/interfaces.

    Examples:

    /etc/network/interfaces
    Code:
    # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
    
    # The loopback interface
    # automatically added when upgrading
    auto lo eth0
    iface lo inet loopback
    
    
    iface eth0 inet static
            address 192.168.0.2
            netmask 255.255.255.0
            network 192.168.0.0
            broadcast 192.168.0.255
            gateway 192.168.0.254
    /etc/resolv.conf
    Code:
    search wolf
    nameserver 192.168.1.10
    nameserver 192.168.1.34
    Edit the files to your settings and /etc/init.d/networking restart will restart the network with the new settings, the search in the resolv.conf is not really necessary I've had it working without it. Almost forgot the hostname is in /etc/hostname. All this as root except the ifconfig.

    Or if you want to do it quickly netcardconfig as root in a console and say no to the DHCP option you can then configure it manually.

  3. #3
    Junior Member registered user
    Join Date
    Jun 2003
    Posts
    22
    Where would I put the DNS if I do it manually through netcardconfig?

  4. #4
    Junior Member registered user
    Join Date
    Jun 2003
    Posts
    22
    Ok I have the "ifconfig eth0" down and i have the IP, Sub and of course the gateway. BUt when i run ifconfig eth0/etc/networking/interfaces

    it tell me no device found.?? why would that be if i can do the infonfig in the first place

  5. #5
    Junior Member registered user
    Join Date
    Jun 2003
    Posts
    22
    OK all i need to know now is where to put my static DNS so that i can run this puppy!

    Well at least I think that is all I need

  6. #6
    Senior Member registered user
    Join Date
    Nov 2002
    Posts
    1,353
    Your dns info goes in /etc/resolv.conf

    Check out the following page for networking info in Debian. If you scroll 3/4 the way down the page you will see a list of files relevant to networking in Debian. The site in general is a good intro to Debian:

    http://aboutdebian.com/network.htm

Similar Threads

  1. 3.7 manual install
    By Tek Guy in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 03-25-2005, 09:36 PM
  2. knoppix manual
    By plener in forum The Lounge
    Replies: 1
    Last Post: 12-23-2004, 11:06 PM
  3. Knoppix 3.6 - gprsconnect manual
    By ck76 in forum Networking
    Replies: 0
    Last Post: 09-14-2004, 04:23 PM
  4. trouble after a manual install
    By Wasteed in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 03-26-2004, 02:11 PM
  5. Manual
    By in forum General Support
    Replies: 0
    Last Post: 01-29-2003, 07:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox picture

Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox

$340.00



Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS picture

Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS

$712.98



DELL PowerEdge R730XD 24x 2.5

DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED

$269.99



HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar picture

HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar

$304.35



Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD picture

Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD

$79.19



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB picture

Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB

$510.00



HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4 picture

HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4

$105.59



DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$274.00



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$297.00