-
Junior Member
registered user
Static DNS manual networking
Hi everyone,
I am on a large network and i am having problems finding where i manually enter the static DNS. I am not using DHCP due to new hardware that is conflicting with my DHCP server. I just need to know how i find out my current IP address on the knoppix machine, and also how to put in a static DNS address. Also what are all the other address it wants me to put in?? Is one of them the DNS with a different name..??
Thanks,
P.S i am a newbie to Linux. (I am jsut starting the R&D to make many servers here)
-
Senior Member
registered user
ifconfig eth0 will tell you the current config of eth0 the files you want are in /etc/resolv.conf and /etc/network/interfaces.
Examples:
/etc/network/interfaces
Code:
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
# automatically added when upgrading
auto lo eth0
iface lo inet loopback
iface eth0 inet static
address 192.168.0.2
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.254
/etc/resolv.conf
Code:
search wolf
nameserver 192.168.1.10
nameserver 192.168.1.34
Edit the files to your settings and /etc/init.d/networking restart will restart the network with the new settings, the search in the resolv.conf is not really necessary I've had it working without it. Almost forgot the hostname is in /etc/hostname. All this as root except the ifconfig.
Or if you want to do it quickly netcardconfig as root in a console and say no to the DHCP option you can then configure it manually.
-
Junior Member
registered user
Where would I put the DNS if I do it manually through netcardconfig?
-
Junior Member
registered user
Ok I have the "ifconfig eth0" down and i have the IP, Sub and of course the gateway. BUt when i run ifconfig eth0/etc/networking/interfaces
it tell me no device found.?? why would that be if i can do the infonfig in the first place
-
Junior Member
registered user
OK all i need to know now is where to put my static DNS so that i can run this puppy!
Well at least I think that is all I need
-
Senior Member
registered user
Your dns info goes in /etc/resolv.conf
Check out the following page for networking info in Debian. If you scroll 3/4 the way down the page you will see a list of files relevant to networking in Debian. The site in general is a good intro to Debian:
http://aboutdebian.com/network.htm
Similar Threads
-
By Tek Guy in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 03-25-2005, 09:36 PM
-
By plener in forum The Lounge
Replies: 1
Last Post: 12-23-2004, 11:06 PM
-
By ck76 in forum Networking
Replies: 0
Last Post: 09-14-2004, 04:23 PM
-
By Wasteed in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 03-26-2004, 02:11 PM
-
By in forum General Support
Replies: 0
Last Post: 01-29-2003, 07:13 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$249.99
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco GLC-FE-100LX 100BASE-LX SFP Transceiver Module
$15.59
Cisco GLC-FE-100LX-RGD 100BASE-LX SFP Transceiver Module
$17.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00