Results 1 to 6 of 6

Thread: Static DNS manual networking

  1. #1
    Junior Member registered user
    Join Date
    Jun 2003
    Posts
    22

    Static DNS manual networking

    Hi everyone,

    I am on a large network and i am having problems finding where i manually enter the static DNS. I am not using DHCP due to new hardware that is conflicting with my DHCP server. I just need to know how i find out my current IP address on the knoppix machine, and also how to put in a static DNS address. Also what are all the other address it wants me to put in?? Is one of them the DNS with a different name..??




    Thanks,



    P.S i am a newbie to Linux. (I am jsut starting the R&D to make many servers here)

  2. #2
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    ifconfig eth0 will tell you the current config of eth0 the files you want are in /etc/resolv.conf and /etc/network/interfaces.

    Examples:

    /etc/network/interfaces
    Code:
    # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
    
    # The loopback interface
    # automatically added when upgrading
    auto lo eth0
    iface lo inet loopback
    
    
    iface eth0 inet static
            address 192.168.0.2
            netmask 255.255.255.0
            network 192.168.0.0
            broadcast 192.168.0.255
            gateway 192.168.0.254
    /etc/resolv.conf
    Code:
    search wolf
    nameserver 192.168.1.10
    nameserver 192.168.1.34
    Edit the files to your settings and /etc/init.d/networking restart will restart the network with the new settings, the search in the resolv.conf is not really necessary I've had it working without it. Almost forgot the hostname is in /etc/hostname. All this as root except the ifconfig.

    Or if you want to do it quickly netcardconfig as root in a console and say no to the DHCP option you can then configure it manually.

  3. #3
    Junior Member registered user
    Join Date
    Jun 2003
    Posts
    22
    Where would I put the DNS if I do it manually through netcardconfig?

  4. #4
    Junior Member registered user
    Join Date
    Jun 2003
    Posts
    22
    Ok I have the "ifconfig eth0" down and i have the IP, Sub and of course the gateway. BUt when i run ifconfig eth0/etc/networking/interfaces

    it tell me no device found.?? why would that be if i can do the infonfig in the first place

  5. #5
    Junior Member registered user
    Join Date
    Jun 2003
    Posts
    22
    OK all i need to know now is where to put my static DNS so that i can run this puppy!

    Well at least I think that is all I need

  6. #6
    Senior Member registered user
    Join Date
    Nov 2002
    Posts
    1,353
    Your dns info goes in /etc/resolv.conf

    Check out the following page for networking info in Debian. If you scroll 3/4 the way down the page you will see a list of files relevant to networking in Debian. The site in general is a good intro to Debian:

    http://aboutdebian.com/network.htm

Similar Threads

  1. 3.7 manual install
    By Tek Guy in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 03-25-2005, 09:36 PM
  2. knoppix manual
    By plener in forum The Lounge
    Replies: 1
    Last Post: 12-23-2004, 11:06 PM
  3. Knoppix 3.6 - gprsconnect manual
    By ck76 in forum Networking
    Replies: 0
    Last Post: 09-14-2004, 04:23 PM
  4. trouble after a manual install
    By Wasteed in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 03-26-2004, 02:11 PM
  5. Manual
    By in forum General Support
    Replies: 0
    Last Post: 01-29-2003, 07:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch picture

Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch

$1300.00



Juniper SRX1500-SYS-JB-AC SRX1500 Services Gateway-Dual Power JPSU-400W-AC picture

Juniper SRX1500-SYS-JB-AC SRX1500 Services Gateway-Dual Power JPSU-400W-AC

$1784.00



Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord picture

Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord

$43.95



Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch picture

Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch

$89.00



Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch picture

Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch

$999.00



JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER picture

JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER

$210.00



Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$40.10



Juniper QFX5100-48S-3AFO Switch 48 x 10Gb SFP+, 6x QSFP 40GE, Dual AC Power picture

Juniper QFX5100-48S-3AFO Switch 48 x 10Gb SFP+, 6x QSFP 40GE, Dual AC Power

$499.00



JUNIPER EX4550-32F-AFO 32-PORT ETHERNET SWITCH 2x POWER SUPPLY - TESTED picture

JUNIPER EX4550-32F-AFO 32-PORT ETHERNET SWITCH 2x POWER SUPPLY - TESTED

$299.99



Juniper EX2300-48P  PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested picture

Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested

$289.00