Impressive! As for the overlay, I think you should try. If a library is statically linked, should there be any problem? You might also get hold of Knoppix 7.5 and check if the problem persists.
I am by no means an KNOPPIX/Linux guru and just would like to share my notes about installing the missing gvim in KNOPPIX 7.4.2.
At the time of writing, neither of vim-gnome/vim-gtk for wheezy or that of jessie can be installed straightaway due to the nature of KNOPPIX. A quick solution to the tricky situation is to retrieve and install all the matching build-depends packages from the snapshot and normal servers and then compile vim-gnome/vim-gtk from source.
Part 1 of 3: retrieve and install the build-depends packages
- Boot KNOPPIX without persistent image.
- With root privilege, append the following to /etc/atp/sources.list .
Code:deb http://snapshot.debian.org/archive/debian/20140822T041524Z/ testing main deb http://snapshot.debian.org/archive/debian/20140827T042507Z/ testing main deb http://snapshot.debian.org/archive/debian/20140930T043556Z/ testing main
- With root privilege, update the package list.
Code:apt-get -o Acquire::Check-Valid-Until=false update
- Download the build-depends packages with specific version.
Code:# --start-- build-depends ## libsepol1 needs to be upgraded from 2.1.4-3 (wheezy) to 2.3-2 (jessie) apt-get download \ libattr1-dev=1:2.4.46-8 libacl1-dev=2.2.51-8 \ libgpm-dev=1.20.4-6 \ libxpm-dev=1:3.5.10-1 \ libxmu-headers=2:1.1.1-1 libxmu-dev=2:1.1.1-1 libxaw7-dev=2:1.0.10-2 \ tcl8.5-dev=8.5.11-2 tcl-dev=8.5.0-2.1 \ ruby1.9.1-dev=1.9.3.194-8.1+deb7u2 ruby-dev=1:1.9.3 \ lua5.2=5.2.1-3+deb7u1 \ liblua5.2-0=5.2.1-3+deb7u1 liblua5.2-dev=5.2.1-3+deb7u1 \ libsepol1=2.3-2 libsepol1-dev=2.3-2 libselinux1-dev=2.3-2 \ libperl-dev=5.20.0-4 \ libpython2.7-dev=2.7.8-4 python2.7-dev=2.7.8-4 libpython-dev=2.7.8-1\ python-dev=2.7.8-1 ## --start-- libgnomeui-dev=2.24.5-3 section apt-get download \ gir1.2-gconf-2.0=3.2.5-1+build1 libgconf2-dev=3.2.5-1+build1 \ libglib2.0-dev=2.42.0-1 \ libgnome-keyring-dev=3.4.1-1 \ gir1.2-gtk-2.0=2.24.24-1 libgtk2.0-dev=2.24.24-1 \ libart-2.0-dev=2.3.21-2 libgail-dev=2.24.24-1 libgnomecanvas2-dev=2.30.3-2 ### --start-- libgnomevfs2-dev=2.24.4-6 section apt-get download libavahi-common-dev=0.6.31-2 libavahi-client-dev=0.6.31-2 \ libavahi-glib-dev=0.6.31-2 \ libxml2-dev=2.9.1+dfsg1-4 \ libgnutlsxx28=3.3.8-2 libgmpxx4ldbl=2:6.0.0+dfsg-4 libgmp-dev=2:6.0.0+dfsg-4 nettle-dev=2.7.1-3\ libgnutls28-dev=3.3.8-2 apt-get download libgnomevfs2-dev=1:2.24.4-6 ### -- end -- libgnomevfs2-dev=2.24.4-6 section apt-get download \ libidl-dev=0.8.14-0.2 orbit2=1:2.14.19-0.3 liborbit2-dev=1:2.14.19-0.3\ libpopt-dev=1.16-7 libbonobo2-dev=2.32.1-3 libcanberra-dev=0.28-6\ libgnome2-dev=2.32.1-5 libbonoboui2-dev=2.24.3-1 apt-get download libgnomeui-dev=2.24.5-3 ## -- end -- libgnomeui-dev=2.24.5-3 section # -- end -- build-depends # --start-- build-depends-indep (docbook-utils=0.6.14-3) apt-get download \ openjade1.3=1.3.2-11.1+b1 docbook-dsssl=1.79-7 \ jadetex=3.13-14 \ libsp1c2=1.3.4-1.2.1-47.1+b1 sp=1.3.4-1.2.1-47.1+b1 libsgmls-perl=1.03ii-32\ sgmlspl=1.03ii-32 apt-get download docbook-utils=0.6.14-3 # -- end -- build-depends-indep (docbook-utils=0.6.14-3)
- With root privilege, purge libgnutls-dev and then install the downloaded packages with gdebi in the same order as above.
Part 2 of 3: build the vim related packagesCode:apt-get purge libgnutls-dev gdebi -n {deb packages}
- Download the source files of vim (2:7.4.488-3~bpo70+1; wheezy backport)
Code:# Save the files on a native Linux filesystem for a smoother build. wget \ http://ftp.de.debian.org/debian/pool/main/v/vim/vim_7.4.488.orig.tar.gz \ http://ftp.de.debian.org/debian/pool/main/v/vim/vim_7.4.488-3~bpo70+1.debian.tar.gz
- Extract the tarballs and move the debian folder to the folder of source code.
- With root privilege, purge ruby1.8 as it's listed as a build-conflict in the control file.
Code:apt-get purge ruby1.8
- Check if the size of terminal is at least 80x24, otherwise the "tests" will fail during compilation.
- Build the vim*.deb packages with dpkg-buildpackages or debuild.
- Save the vim related packages and liblua5.2-0=5.2.1-3+deb7u1 package on a hard drive.
Part 3 of 3: install vim related packages
- Reboot KNOPPIX with persistent image enabled.
- With root privilege, purge vim (2:7.4.335-1) and its related packages
Code:apt-get purge vim vim-runtime vim-common vim-gui-common
- With root privilege, install the liblua5.2-0 package and the newly built vim packages with gdebi in the order of liblua5.2-0, vim-runtime, vim-common, vim-gui-common and vim-gnome.
Final thoughts
Since the vim packages are built against a newer version of libsepol1 than that of the stock KNOPPIX 7.4.2, should it also be included in the overlay image? Any suggestions will be appreciated.
Impressive! As for the overlay, I think you should try. If a library is statically linked, should there be any problem? You might also get hold of Knoppix 7.5 and check if the problem persists.
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99