If you want to start with Adriane in a HD installation rename '/etc/inittab' to '/etc/inittab_orig' and copy '/etc/inittab.adriane' to '/etc/inittab'.
Hello!
I've installed Knoppix to hard drive using 0wn. I want to set it up to boot in Adriane mode, and tweak the menu for my father.
I tried to add "adriane" at Grub boot line, but it keeps booting in graphical mode.
I've downloaded the DVD version 7.4.2 and I used Unetbootin to put it in a pendrive (USB flash drive). I've found that the DVD boot process is different from the hdd install boot process. The DVD's seems to change /etc/inittab, /etc/sudoers and /etc/PolicyKit/PolicyKit.conf from some init script. But I don't know how to set this up for the hdd.
So, what are my options to change the boot process in the hdd install? Keep in mind, that I would like to change the default Adriane menu, and I'm not planning to remaster a Knoppix/Adriane DVD
Finally: Thank you, Klaus, for mastering this distro! : - D
Thanks in advance for your time and your advice,
Regards,
-- Knoforus
If you want to start with Adriane in a HD installation rename '/etc/inittab' to '/etc/inittab_orig' and copy '/etc/inittab.adriane' to '/etc/inittab'.
Thanks Werner! It worked as you said. ^_^
Regards,
-- Knoforus
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 Blade Server
$39.99
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 256GB H330 2x10Gb X520
$450.00