If you want to start with Adriane in a HD installation rename '/etc/inittab' to '/etc/inittab_orig' and copy '/etc/inittab.adriane' to '/etc/inittab'.
Hello!
I've installed Knoppix to hard drive using 0wn. I want to set it up to boot in Adriane mode, and tweak the menu for my father.
I tried to add "adriane" at Grub boot line, but it keeps booting in graphical mode.
I've downloaded the DVD version 7.4.2 and I used Unetbootin to put it in a pendrive (USB flash drive). I've found that the DVD boot process is different from the hdd install boot process. The DVD's seems to change /etc/inittab, /etc/sudoers and /etc/PolicyKit/PolicyKit.conf from some init script. But I don't know how to set this up for the hdd.
So, what are my options to change the boot process in the hdd install? Keep in mind, that I would like to change the default Adriane menu, and I'm not planning to remaster a Knoppix/Adriane DVD
Finally: Thank you, Klaus, for mastering this distro! : - D
Thanks in advance for your time and your advice,
Regards,
-- Knoforus
If you want to start with Adriane in a HD installation rename '/etc/inittab' to '/etc/inittab_orig' and copy '/etc/inittab.adriane' to '/etc/inittab'.
Thanks Werner! It worked as you said. ^_^
Regards,
-- Knoforus
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
CISCO MCS 7800 (2x) Intel Xeon @ 2.33 GHz 4GB Ram, NO HDD
$44.99
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Intel SR2JT Xeon E5-2683 v4 2.10GHz 16-Core CPU Processor
$21.96
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon Gold 6126 2.6 GHz LGA 3647 Server CPU Processor SR3B3
$17.99
Dell Precision Tower 7910 | 2x Intel Xeon E5-2643 V3 | 32GB RAM | No HDD | No OS
$179.95
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98