Hello!
I have Adriane (Knoppix 7.4.2) installed on HDD (with 0wn). I'm trying to set up a synthetized voice suitable and comfortable for my 87 year old father. Default voice is not clear nor comfortable to him.
I've been researching about some configurations files for sbl, speech-dispatcher and espeak. I was able to succesfully set a "FEMALE2" voice type, slower a bit the speed and make all punctuations be sent to synthesis.
But pitch is higher and speed is faster at Adriane menu, same at bash shell, than when running KARL, or while paging with "less" or when it says "Are you sure?" after hiting any option at the shutdown menu. The latter voice has lower pitch and slower speed, and my father likes it more.
Further more, after exiting KARL, "PunctuationMode" gets undesirably back to "some". That is dots, commas, hyphens, etc, are not stated anymore when screen-reading a whole line.
Where do I have to configure voice settings to apply uniformly for all?
I already tweaked:
### /etc/speech-dispatcher/speechd.conf
# These were the original settings
# DefaultPunctuationMode = "none"
# DefaultVoiceType = "MALE1"
# DefaultRate = 0
# DefaultPitch = 0 # I didn't change this one. Showing for referral
DefaultPunctuationMode = "all"
DefaultVoiceType = "FEMALE2"
DefaultRate = -60
### /etc/sbl/profile/default
# spkfrq = 5 # This one was the original setting
spkfrq = 3
# spkspd = 5 # This one was the original setting
spkspd = 3
### /etc/sbl/spk/speechd
voice1=5 # I assumed the female one, was the 5th voice using CapsLock+F10
voice5=1
# Original speeds
# speed1=-40
# speed2=-30
# speed3=-20
# speed4=-10
# speed5=1
# speed6=10
# speed7=20
# speed8=35
# speed9=50
speed1=-60
speed2=-60
speed3=-60
speed4=-60
speed5=-60
speed6=-60
speed7=-60
speed8=-60
speed9=-60
# I didn't touch the frequency settings. Showing for referral
frequency3=-50
frequency5=0
### /etc/adriane/adriane.conf
### /.adriane/adriane.conf
### /home/knoppix/.adriane/adriane.conf
# These were the original settings
# ESPEAK_PITCH = 120
# ESPEAK_SPEED = 150
unset ESPEAK_PITCH
unset ESPEAK_SPEED
### /etc/sbl.conf
# Unchanged
### /etc/sbl/spkfilter/default.en
# Unchanged
### /etc/speech-dispatcher/modules/espeak.conf
# Unchanged
A note regards adriane-screanreader script: I checked that this script (re)exec's itself as root. Hence, when it comes to load $HOME/.adriane/adriane.conf (via adriane-common.sh), it gets root's HOME, and not knoppix's. At boot time, this script is launched from knoppix-autoconfig, and root's HOME is '/'. Afterwards, when launched from shell, root's HOME is the usual '/root' . I don't know if this is normal and/or expected behaviour. It seems to me that the user knoppix's Adriane configuration might get 'cloaked' for the screenreader.
I would like to set up voice parameters uniformly among applications, so I might try out different speeds and pitchs until I'll find the most suitable for my father.
Then, I would really like to clearly understand how all these software work together, and how their configuration and data files interact or come to play, in order to make things work and without messing anything.
Thanks in advance for your time and your advice,
Regards,
-- Knoforus
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
CSE-118 Supermicro 1U 3x GPU Server 2.6Ghz 20-C 128GB CX353A 2x1600W PSU Rails
$454.03
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HYVE ZEUS V1 1U BAREBONE SERVER 2X10CORE E5-2680V2 2.8GHz 16GB RAM RISER NO RAIL
$180.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00