Hello!
I have Adriane (Knoppix 7.4.2) installed on HDD (with 0wn). I'm trying to set up a synthetized voice suitable and comfortable for my 87 year old father. Default voice is not clear nor comfortable to him.
I've been researching about some configurations files for sbl, speech-dispatcher and espeak. I was able to succesfully set a "FEMALE2" voice type, slower a bit the speed and make all punctuations be sent to synthesis.
But pitch is higher and speed is faster at Adriane menu, same at bash shell, than when running KARL, or while paging with "less" or when it says "Are you sure?" after hiting any option at the shutdown menu. The latter voice has lower pitch and slower speed, and my father likes it more.
Further more, after exiting KARL, "PunctuationMode" gets undesirably back to "some". That is dots, commas, hyphens, etc, are not stated anymore when screen-reading a whole line.
Where do I have to configure voice settings to apply uniformly for all?
I already tweaked:
### /etc/speech-dispatcher/speechd.conf
# These were the original settings
# DefaultPunctuationMode = "none"
# DefaultVoiceType = "MALE1"
# DefaultRate = 0
# DefaultPitch = 0 # I didn't change this one. Showing for referral
DefaultPunctuationMode = "all"
DefaultVoiceType = "FEMALE2"
DefaultRate = -60
### /etc/sbl/profile/default
# spkfrq = 5 # This one was the original setting
spkfrq = 3
# spkspd = 5 # This one was the original setting
spkspd = 3
### /etc/sbl/spk/speechd
voice1=5 # I assumed the female one, was the 5th voice using CapsLock+F10
voice5=1
# Original speeds
# speed1=-40
# speed2=-30
# speed3=-20
# speed4=-10
# speed5=1
# speed6=10
# speed7=20
# speed8=35
# speed9=50
speed1=-60
speed2=-60
speed3=-60
speed4=-60
speed5=-60
speed6=-60
speed7=-60
speed8=-60
speed9=-60
# I didn't touch the frequency settings. Showing for referral
frequency3=-50
frequency5=0
### /etc/adriane/adriane.conf
### /.adriane/adriane.conf
### /home/knoppix/.adriane/adriane.conf
# These were the original settings
# ESPEAK_PITCH = 120
# ESPEAK_SPEED = 150
unset ESPEAK_PITCH
unset ESPEAK_SPEED
### /etc/sbl.conf
# Unchanged
### /etc/sbl/spkfilter/default.en
# Unchanged
### /etc/speech-dispatcher/modules/espeak.conf
# Unchanged
A note regards adriane-screanreader script: I checked that this script (re)exec's itself as root. Hence, when it comes to load $HOME/.adriane/adriane.conf (via adriane-common.sh), it gets root's HOME, and not knoppix's. At boot time, this script is launched from knoppix-autoconfig, and root's HOME is '/'. Afterwards, when launched from shell, root's HOME is the usual '/root' . I don't know if this is normal and/or expected behaviour. It seems to me that the user knoppix's Adriane configuration might get 'cloaked' for the screenreader.
I would like to set up voice parameters uniformly among applications, so I might try out different speeds and pitchs until I'll find the most suitable for my father.
Then, I would really like to clearly understand how all these software work together, and how their configuration and data files interact or come to play, in order to make things work and without messing anything.
Thanks in advance for your time and your advice,
Regards,
-- Knoforus
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$16.29
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Corsair Vengeance LPX 32GB PC4-25600 (DDR4-3200) Memory NEVER USED LOOSE STICKS
$40.00
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 64GB 4x 16GB 2Rx4 PC4-17000R DDR4 2133MHz ECC REG RDIMM Server Memory RAM
$87.96