No! Check the possibilities of your BIOS/UEFI.Does this mean my system will not boot from any USB pen drive ..
I have loaded 7.4.2 onto an 8 GB pen drive. I used the flash-knoppix link on the desk top. There was an error message that stated the cp couldn't extend the partition (I don't have the exact wording). That's a problem for later.
When I interrupt the boot sequence and get to the screen where I select the device to boot from, the pen drive is recognized, but the line reads: 6) -USB HDD.
It's the only line where the device is preceded by a dash.
Does this mean my system will not boot from any USB pen drive or just this one. If it won't boot from any pen drive, there is no point in trying to solve the "cp failed to extend" problem.
Thanks.
No! Check the possibilities of your BIOS/UEFI.Does this mean my system will not boot from any USB pen drive ..
Werner,
Thanks for the reply.
How do I check the capabilities of my BIOS/UEFI? Where do I look and what do I look for?
What does the dash ("-") that precedes the device signify?
Read the manual of your motherboard.
For example, with my Dell Inspiron:
Immediately select either Function Key FN-2 or FN-12 before any boot process starts.
With FN-2, one may select any one of a number of devices from which to boot;
if USB is a choice, select that and a LiveUSB like Knoppix should boot this time only.
If no choice is made here, the first bootable device available in the sequence shown
will be selected for booting. FN-2 also allows you the same option as FN-12 to
re-arrange order of sequence of devices from which to boot.
With FN-12, if USB is a choice, arrange the sequence such that USB is first and a LiveUSB
like Knoppix should boot every time its USB is plugged-in. If the sequential order is saved,
re-arranging the order of sequence of devices from which to boot needs to be done only once.
If USB is available, but not a choice for booting, and if CD is both available, and a
choice for booting, then it is possible to use a Knoppix boot-only CD to achieve booting
from a Knoppix LiveUSB. In this case, one would use FN-2 or FN-12 to select CD to be
first in the order of sequence to boot from the Knoppix LiveUSB.
Your computer may be slightly different; see your owner's manual if it is.
IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE
$199.87
Dell PowerEdge R730xd Server 2.60Ghz 32-Core 64GB 800GB SSD Debian Linux
$836.80
POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives
$179.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8
$449.96
Red Hat Enterprise Linux 5 Server - New and Sealed
$16.99
PFSENSE 15" Depth Server Router Firewall Supermicro X11SSH-F E3-1240 V5 32GB RAM
$382.00
32GB Web HTML HTTP Server, Great tool for eBay seller & kids to host web site
$229.99
1U Open Source Router Firewall X10SLH-N6-ST031 E3-1270 V3 6x 10GB Ethernet 16GB
$419.00