While snooping around the stock init script, I spotted a variable, home, in the mountdata function standing out from the crowd. After doing some quick tests, the preliminary results are summarised as follows,
Prerequisite: The persistent overlay (.img, .aes or .inf) being on the same partition as the KNOPPIX file.
Functionality: Loading a specific persistent overlay at the boot time.
Usage: knoppix home=/mnt-system/foobar/dummy
*The dirname and basename cannot contain any whitespace characters.
*The basename needs to be unique if there are more than one overlay files in the same folder because the suffix cannot be part of the argument.
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.59
Seagate ST8000NM0045 8TB 7.2k SATA 6Gbps 3.5" 4Kn Format Hard Drive Open Box New
$84.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.29
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
Cisco A03-D1TBSATA 1TB 7200rpm SATA 6gbps 2.5in Drive
$9.00
WD 5TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0050BBK-WESN
$78.99
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99