-
Senior Member
registered user
Run with ramdisk, update persistent store instead of ramdisk
The traditional way of using persistent store has been to remaster seldom, if at all, and use a rather "large" (as compared to the sizes of short time changes) persistent store, typically 4 GB for FAT32 compatibility. I have usuallly done a couple (1-4) of remasterings of each Knoppix version, and the option of running with just ramdisk has been for special occasions only. I could use the ramdisk -> overlay technique, but I don't find it very useful for me.
With Debian live and much more frequent squashfs remasterings, I have started to look at ramdisk use in another way. Right after a remastering, it won't make much difference whether you run with ramdisk or persistent store, and there may be a few advantages to decide only afterwards whether you want to keep the changes. Also. the need for space is rather limited, it is mostly for program installs and upgrades - almost all user space files (except for init/configuration stuff) are kept on volumes that are mounted the ordinary way.
An alternative way of using persistent store/ramdisk could be to read the content of the persistent store into the ramdisk on startup, run from ramdisk and have the option to save to persistent store as needed, typically with a question about saving on shutdown. Most of the time, I would choose not to save.
Reading from persistent store into the ramdisk takes some time, but with my use, typically below 1 GB used on persistent and SSD disks, it would take only a few seconds. And the machine would run faster.
My total uncompressed system size is around 10 GB. That includes Oracle XE 11g and VMware workstation 10. With default squashfs compression, I have yet to approach the 4GB "limit", but the system is rather bloat-free.
-
Senior Member
registered user
Greetings, Capricorny.
I think you might find MX-14 interesting even though it is
currently a 32-bit Live system, it has built-in persistence
and re-mastering capabilities. The author
of the MX's init is BitJam, who gives Klaus K credit for inspiring it.
With a fat32 base, it has a 4G filesize limit. Uses squashfs for
saving compressed linuxfs, remasterings. Choice at boot on
different persistence combinations.
See http://mepiscommunity.org/mx.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$219.99
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$140.79
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
Drobo DR04D-U External Data Backup Storage Raid Hard Drive 4 Bay NAS USB
$42.50
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45