-
Knoppix on Toshiba Skullcandy freezes after a few seconds
I'm trying to run Knoppix on a Toshiba Skullcandy laptop (2015 model). It has an AMD A8 processor and Radeon graphics. 'knoppix64 no3d' causes it to boot OK and get to the graphics screen, but after a few seconds everything freezes and only a forced power-off works. Does anyone have Knoppix working on this kind of system ? Am I missing a cheatcode, and if so which one ?
Things run OK if I boot with 'knopppix64 2', but obviously I don't get a GUI that way and that's no use to me.
'knoppix64 no3d failsafe' also hangs after a few seconds.
Thanks for all help anyone can give !
Chris Ward
-
Senior Member
registered user
Hi, and welcome to Knoppix!
Run upto init 2 and install a specific proprietory AMD Radeon linux driver for your graphics processor.
After installation, restart, and you will hopefully have the GUI.
And from the next time, please post detailed spec data for us to help.
Last edited by rajibando; 06-12-2015 at 12:54 PM.
-
Junior Member
registered user
Originally Posted by
rajibando
Hi, and welcome to Knoppix!
Run upto init 2 and install a specific proprietory AMD Radeon linux driver for your graphics processor.
After installation, restart, and you will hopefully have the GUI.
And from the next time, please post detailed spec data for us to help.
Last time I booted, I waited about 15 minutes and everything 'unfroze'.
What detailed spec do you want, how do I find it, and how do I set up the appropriate AMD Radeon linux driver ?
-
Senior Member
registered user
Not so many questions at one time
Let's take things step by step.
Are you familiar with Linux? ... Knoppix?
Take out those papers you received from your vendor when you bought that laptop.
There will be detailed info about your Graphics Card's make, every single detail.
Go to AMD website and search for the appropriate linux driver file.
Download it. Save it where it is going to last really long.
Then use 'knoppix64 2", the one your wrote as cheatcode.
Once reached there, type and go to where you saved the driver, at the terminal.
Run the file.
Follow the instructions displayed by the driver while installing.
After it's over, you could try startx.
See what happens.
If the graphics is okay and the system works, restart and make a persistent image.
You have to install the driver over again if you didn't have a persistent.
Follow all instructions on Knoppix website meticulously.
Good luck!
-
Originally Posted by
chris-ukl
Last time I booted, I waited about 15 minutes and everything 'unfroze'.
What detailed spec do you want, how do I find it, and how do I set up the appropriate AMD Radeon linux driver ?
Why do you capture someone else's thread?
Last edited by Werner P. Schulz; 06-12-2015 at 09:33 PM.
-
Junior Member
registered user
Sorry, I seem to have 2 user-ids on knoppix.net. I am tjcw01 and chris-ukl.
-
Therefore I suggest, to purge your newer registration to avoid further confusions or shall I purge your registration from 2005?
-
Which Knoppix version CD or DVD are you using? 7.4.2 or 7.5?
Originally Posted by
tjcw01
I'm trying to run Knoppix on a Toshiba Skullcandy laptop (2015 model). It has an AMD A8 processor and Radeon graphics. 'knoppix64 no3d' causes it to boot OK and get to the graphics screen, but after a few seconds everything freezes and only a forced power-off works. Does anyone have Knoppix working on this kind of system ? Am I missing a cheatcode, and if so which one ? Things run OK if I boot with 'knopppix64 2', but obviously I don't get a GUI that way and that's no use to me. 'knoppix64 no3d failsafe' also hangs after a few seconds. Thanks for all help anyone can give ! Chris Ward
Which Knoppix version CD or DVD are you using? Knoppix 7.4.2 or 7.5 or 7.4.1? Get the most recent version that you can obtain and let us know what happens.
-
Junior Member
registered user
Please purge the 'tjcw01' registration
-
New laptop, new Knoppix version 7.4.2 and 7.5.0
- hi Chris!
- Knoppix 7.4.2 and 7.5.0 work great on a new laptop, 2015, like you have.
- Have you checked the case for dust? I've had problems with laptops gettting too hot and start acting contrary.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell M630 PowerEdge Blade Server
$700.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99