-
Junior Member
registered user
Remastering instructions in the wiki need updating
I got + genisoimage -l -r -J -V KNOPPIX -b boot/isolinux/isolinux.bin -no-emul-boot -boot-load-size 4 -boot-info-table -c boot/isolinux/boot.cat -o /home/knoppix/knx/remastered.iso /home/knoppix/knx/master I: -input-charset not specified, using utf-8 (detected in locale settings) genisoimage: Uh oh, I cant find the boot image 'boot/isolinux/isolinux.bin' ! when I tried remastering with the instructions in the wiki, for Knoppix CD 7.2 . Would someone who knows what they are doing care to go through the files and get the 'genisoimage' right for the current syslinux/isolinux ? Thanks !
-
Your posting isn't formatted and therefore unreadable.
Please use the formatting suggestions and post again:
Use double "new line" for new section.
You can use the "Go Advanced" button to have more abilities to format the posting; before sending your posting use "Preview" to see how it looks like.
If "noscript" (within Iceweasel/Firefox) is active for http://knoppix.net/forum/ disable it for this website; otherwise you cannot use the format abilities. Do not use Chrome/Chromium!
Below the editor area is the "Additional Options" area. With "Attachments → Manage Attachments" you can upload images and after this insert them in your posting.
-
Junior Member
registered user
Remastering instructions in the wiki need updating
I got
+ genisoimage -l -r -J -V KNOPPIX -b boot/isolinux/isolinux.bin -no-emul-boot -boot-load-size 4 -boot-info-table -c boot/isolinux/boot.cat -o /home/knoppix/knx/remastered.iso /home/knoppix/knx/master
I: -input-charset not specified, using utf-8 (detected in locale settings) genisoimage: Uh oh, I cant find the boot image 'boot/isolinux/isolinux.bin' !
when I tried remastering with the instructions in the wiki, for Knoppix CD 7.2 . Would someone who knows what they are doing care to go through the files and get the 'genisoimage' right for the current syslinux/isolinux ? Thanks !
(Hope this is formatted reasonably)
Last edited by chris-ukl; 06-12-2015 at 10:45 PM.
Reason: Addd
-
From the Wiki:
- Find the partition you will use to work on and change the variable "PFAD" within the scripts as you need. In this example it is called /media/sda1.
Have you done this within krhowto_1 to krhowto_4?
-
Junior Member
registered user
I was working on a USB key which had been installed from Knoppix CD. I changed PFAD to /home/knoppix in the scripts.
The problem is that the bootfile for the CD has changed. I can maybe figure what is going on by looking at the 'syslinux' web site, but maybe someone who already knows could get it right first time.
-
Junior Member
registered user
I think it may be a difference between running from USB key and CD. Let me try it again, from CD.
-
Yes, the script only works with the origin CD.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
881507-001 HPE 2.4TB SAS 12G 10K SC 512E DS G8-G10 Hard Drive 881457-B21 F/S
$274.95
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.15
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95