Hi!
It's a common problem, not a lot of people get this right. When I boot with lang=ru cheatcode, /etc/init.d/knoppix-autoconfig automatically selects xkeyboard=ru, too. The problem is that to get any work done I still need to go to keyboard layout settings, add 'us' keyboard and select some switchng hotkey (it's impossible to type commands or URIs with 'ru' layout, you'll get ыуечлиьфз -щзешщт пкзЖсекд_ыршае_ещппду гыбкг and реезЖ..лтщззшчютуе. instead). It's not a grave problem in Knoppix (not only I can add xkeyboard=us to boot parameters, there is even a GUI to setup layouts), but it can be solved completely in different ways:
1) Add another cheatcode which would set XKBOPTIONS in /etc/default/keyboard, so it would be possible to boot like this: knoppix lang=ru xkeyboard=us,ru xkbopts=grp:ctrl_shift_toggle
2) Copy the logic from, for example, d-i (https://sources.debian.net/src/conso...n.config/#L487): they first set the layout[s] based on the locale, adding 'us' if needed, then add -option grp:alt_shift_toggle,grp_led:scroll if there is more than one layout (also, lv3:ralt_switch if the layout is single, but non-US).
Best regards,
Ivan
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$140.79
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
Drobo DR04D-U External Data Backup Storage Raid Hard Drive 4 Bay NAS USB
$42.50
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 Type B For 3.5" SATA HDDs
$69.91
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59