Hi!
It's a common problem, not a lot of people get this right. When I boot with lang=ru cheatcode, /etc/init.d/knoppix-autoconfig automatically selects xkeyboard=ru, too. The problem is that to get any work done I still need to go to keyboard layout settings, add 'us' keyboard and select some switchng hotkey (it's impossible to type commands or URIs with 'ru' layout, you'll get ыуечлиьфз -щзешщт пкзЖсекд_ыршае_ещппду гыбкг and реезЖ..лтщззшчютуе. instead). It's not a grave problem in Knoppix (not only I can add xkeyboard=us to boot parameters, there is even a GUI to setup layouts), but it can be solved completely in different ways:
1) Add another cheatcode which would set XKBOPTIONS in /etc/default/keyboard, so it would be possible to boot like this: knoppix lang=ru xkeyboard=us,ru xkbopts=grp:ctrl_shift_toggle
2) Copy the logic from, for example, d-i (https://sources.debian.net/src/conso...n.config/#L487): they first set the layout[s] based on the locale, adding 'us' if needed, then add -option grp:alt_shift_toggle,grp_led:scroll if there is more than one layout (also, lv3:ralt_switch if the layout is single, but non-US).
Best regards,
Ivan
DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45
$387.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU
$129.99
Dell Poweredge R720xd 2x Xeon E5-2670 2.6GHz 16-Cores 64gb H710p 26x Trays
$339.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP ProLiant DL380 Gen9 2U Server 24 BAY 2.5" Xeon E5-2680 v4 64GB RAM H240ar
$159.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$153.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00