Hi!
It's a common problem, not a lot of people get this right. When I boot with lang=ru cheatcode, /etc/init.d/knoppix-autoconfig automatically selects xkeyboard=ru, too. The problem is that to get any work done I still need to go to keyboard layout settings, add 'us' keyboard and select some switchng hotkey (it's impossible to type commands or URIs with 'ru' layout, you'll get ыуечлиьфз -щзешщт пкзЖсекд_ыршае_ещппду гыбкг and реезЖ..лтщззшчютуе. instead). It's not a grave problem in Knoppix (not only I can add xkeyboard=us to boot parameters, there is even a GUI to setup layouts), but it can be solved completely in different ways:
1) Add another cheatcode which would set XKBOPTIONS in /etc/default/keyboard, so it would be possible to boot like this: knoppix lang=ru xkeyboard=us,ru xkbopts=grp:ctrl_shift_toggle
2) Copy the logic from, for example, d-i (https://sources.debian.net/src/conso...n.config/#L487): they first set the layout[s] based on the locale, adding 'us' if needed, then add -option grp:alt_shift_toggle,grp_led:scroll if there is more than one layout (also, lv3:ralt_switch if the layout is single, but non-US).
Best regards,
Ivan
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Dell HBA330 12GBPS SAS Internal HBA Controller (NON-RAID) PCIe Card J7TNV 0J7TNV
$40.95
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99