-
unsuccessful boot from scsi cdrom
I tried to boot and run knoppix from a scsi cdrom. It booted properly but kicked out with an error during discovery when it rediscovered the scsi cdrom drive. The error was something like "could not find knoppix files (or directories)".
-
Senior Member
registered user
Re: unsuccessful boot from scsi cdrom
--Make sure the SCSI cdrom drive is set to ID 0. I haven't had problems booting Knoppix from mine, but then again I haven't tried it in a while because that drive is on the server...
--Also make sure you're using a high-quality / brand-name 700MB CDR. My rig booted Knoppix just fine a month or so ago - on an old Plextor 4Plex Plus, and they don't know from cdr/W's.
Originally Posted by
sireasoning
I tried to boot and run knoppix from a scsi cdrom. It booted properly but kicked out with an error during discovery when it rediscovered the scsi cdrom drive. The error was something like "could not find knoppix files (or directories)".
-
should not have to reconfigure hardware
Doesn't it defeat the purpose if you have to reconfigure the hardware to be able to run knoppix? knoppix should be able to run from a scsi cdrom regardless of whether it is ID0 or not.
-
Senior Member
registered user
Re: should not have to reconfigure hardware
--Not really. Knoppix is giving you a LOT of stuff, for no cost. And, it's doing everything DYNAMICALLY - at boot, without touching the hard drive.
--Look up the specs for your SCSI card. I've always used Adaptec, and AFAIK the CDROM drive has to be ID 0 for the system to be able to boot properly from it. (I obviously wasn't able to do this myself, until I reconfigured my SCSI cdrom to be 0.)
Originally Posted by
sireasoning
Doesn't it defeat the purpose if you have to reconfigure the hardware to be able to run knoppix? knoppix should be able to run from a scsi cdrom regardless of whether it is ID0 or not.
Similar Threads
-
By phlox in forum Hardware & Booting
Replies: 5
Last Post: 04-05-2004, 07:54 PM
-
By jerome in forum The Lounge
Replies: 3
Last Post: 01-01-2004, 08:38 AM
-
By 3133 in forum The Lounge
Replies: 2
Last Post: 10-12-2003, 03:27 PM
-
By Raz in forum General Support
Replies: 14
Last Post: 06-01-2003, 08:03 AM
-
By Koga in forum General Support
Replies: 3
Last Post: 01-11-2003, 12:07 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 A Grade Processor
$5.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Rare WaterCooled HP Z800 Workstation Dual Xeon X5680 16GB RAM 120GB SSD Nvidia
$279.56