Results 1 to 7 of 7

Thread: Oddity booting Knoppix on Supermicro H8DMU+ board

  1. #1
    Junior Member
    Join Date
    Jun 2015
    Posts
    4

    Oddity booting Knoppix on Supermicro H8DMU+ board

    Opterion server board, was working happily, then I tried adding a PCI-e USB 3.0 card. Would not reboot after poweron, even if the card is removed.
    Goes through bios, hits grub, gets to "Loading kernel", hangs (i.e., ctrl-alt-del does not reset, requries reset or poweroff).

    Reset the bios to failsafe defaults, purged nvram, no help: "Loading kernel", newline, hung.
    Pulled battery did hardware reset, went into bios, loaded failsafe defaults, ditto.

    I've used a unetbootin image of gentoo stage3 to boot his machine before for initial installation.
    Tried that, same result: Loading Kernel, newline, hangs.

    In case of hardware issue I've stripped the disk controller and drives & riser cards leaving nothing but a bare motherboard + cpu's + memory.
    Same result.

    Tried Knoppix via unetbootin of KNOPPIX_V7.4.2DVD-2014-09-28-EN.iso.

    This is where things get wierd.

    Choosing "debug64" from the main menu gives me:
    loading /boot/ ... /linux64 OK
    loading /boot/ ... /mininit.gz OK
    early console setup
    early console decompress_kernel
    Bootking the Kernel
    <hangs>

    Choosing "knoppix64" gives slightly different:
    Loading ... linux64
    Loading ... minirt.gz
    early console decompress
    decompressing linux Parse ELF done
    Booting linux kernel
    <hangs>

    Choosing "Default" works with:
    Loading /ubnkern
    Booting linux kernel
    <things happen and the system ends up in window manager>

    Q: Does anyone know where the documentation for ubnkern, or the differences between choosing knoppix64 or debug64 and Default are described?
    Q: Anyone else with an H8DMU+ that has applied any workarounds they can share?

    thanks

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    In case of hardware issue ..
    What does memtest86 say after a running time more than six hours?

  3. #3
    Junior Member
    Join Date
    Jun 2015
    Posts
    4

    memtest86 does not run on the opteron

    Quote Originally Posted by Werner P. Schulz View Post
    What does memtest86 say after a running time more than six hours?
    trying to run memtest86 from any of the distros leaves me back at the kernel-choice menu in ~1 sec.

  4. #4
    Junior Member
    Join Date
    Jun 2015
    Posts
    4
    With knoppix running I checked dmesg and there was nothing reported by the memory scrubber.

  5. #5
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    No, don't start Knoppix! Use the Knoppix Cheatcode "memtest".

    In the initial boot phase you'll see the Knoppix emblem with the little penguin and the commandline at the bottom of the screen. Type only memtest after "boot: " in the commandline and press [Enter].

  6. #6
    @ lambark

    A few .cfg files in the /boot/isolinux folder of ISO image file may interest you a bit. After seeing another successful case of making a bootable usb device with unetbootin, I am curious about how unetbootin works and cannot find a full set of its user's manuals as well. From the brief summaries on its sourceforge website, I guess it is kind of a boot loader installation GUI which uses either Syslinux or GRUB (in general) as the backend. If so, installing the boot loader directly from terminal with appropriate arguments should be feasible in your case. By the way, you could also try out the very first KNOPPIX USB device in question on a less cutting-edge motherboard to see if the glitch is reproducible.


    ATB,

  7. #7
    Junior Member
    Join Date
    Jun 2015
    Posts
    4

    Found the fix

    Quote Originally Posted by superman View Post
    @ lambark

    less cutting-edge motherboard

    ATB,
    This board is Socket-F: old enough to have been out of production for ~5 years. You can't even buy them from Supermicro at this point.

    At some point I must have seemed annoyed enough to satisfy the poltergeists: After one last hard-reset (remove battery & short the
    leads with a screwdriver) the existing unetbootin+gentoo install loaded the kernel as usual and I'm running again.

    Same thumb drive.
    Same reset to failsafe defaults.
    Same re-configs of fan, etc, in the bios.

    Poltergeists.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Samsung Galaxy Tab A9 (X110) 64GB 4GB RAM International Version (New) picture

Samsung Galaxy Tab A9 (X110) 64GB 4GB RAM International Version (New)

$129.99



Samsung Galaxy Tab A8 10.5

Samsung Galaxy Tab A8 10.5" 64GB Gray WiFi Tab SM-X200NZAZXAR 2022 Model Bundle

$130.00



Samsung Galaxy Tab A 8

Samsung Galaxy Tab A 8" SM-T387V 32GB Verizon Tablet (No SIM Tray) Grade B

$31.99



Samsung Chromebook 2 503C XE503C12-K01US (Octa 5420 1.9GHz - 4GB RAM - 16GB SSD) picture

Samsung Chromebook 2 503C XE503C12-K01US (Octa 5420 1.9GHz - 4GB RAM - 16GB SSD)

$17.92



Samsung Galaxy Tab A 8

Samsung Galaxy Tab A 8" SM-T387V 32GB Verizon WIFI + Cellular Grade A Condition

$54.99



Samsung XE310XBA Chromebook 4 11.6

Samsung XE310XBA Chromebook 4 11.6" w/Celeron 1.1GHz/4GB/16GB SSD - Used

$38.00



NEW Samsung Galaxy Tab A8 10.5-in 32GB Tablet - Gray SM-X200 picture

NEW Samsung Galaxy Tab A8 10.5-in 32GB Tablet - Gray SM-X200

$129.98



Samsung Tab A7 Lite T227U 32GB GSM Unlocked Great picture

Samsung Tab A7 Lite T227U 32GB GSM Unlocked Great

$54.99



Samsung Galaxy Tab S9 FE SM-X518U 128GB, Wi-Fi+5G (Carrier Unlocked) 10.9

Samsung Galaxy Tab S9 FE SM-X518U 128GB, Wi-Fi+5G (Carrier Unlocked) 10.9"- Gray

$409.98



Samsung Galaxy Tab A8 - SM-X200 - 32GB - Wi-Fi 10.5

Samsung Galaxy Tab A8 - SM-X200 - 32GB - Wi-Fi 10.5" Gray - EXCELLENT Condition

$109.95